Specifications

Moving to a desired location in the song (Locate/Marker function)
ZOOM PS-04 37
3. Repeatedly press the cursor [W] key
to bring up the indication “TR x-y” on
the display (where x is the track
number and y the V-take number).
While this screen is shown, you can change the
V-take for the currently selected track.
4. Turn the dial to select the desired
V-take number.
When you select an unrecorded V-take, the
indication “E” (for “Empty”) is shown to the right
of the V-take number.
5. If required, use the status keys or
cursor left/right keys to change the
track, and then select the V-take for
that track.
6. Press the [EXIT] key to return to the
AUDIO mode top screen.
Moving to a desired location in
the song (Locate/Marker function)
This section describes how to jump to a point
specified in minutes/seconds/milliseconds or
measure/beat units (Locate function) and how to set
a mark at any desired point and jump to that point
(Marker function).
■ Specifying time or measures
You can specify a point in minutes/seconds/
milliseconds or measure/beat units, and move to
that point.
1. From the AUDIO mode top screen,
set the counter display format to time
or measure/beat.
While the AUDIO mode top screen is shown, you
can control the numeric counter indication to go to
a point.
2. Use the cursor left/right keys to
cause a display digit to flash.
The flashing digit is the one that can be adjusted.
3. Turn the dial to adjust the value of the
flashing digit.
When the value is changed, the recorder
immediately moves to the new point. By pressing
the [R/P] key, you can start playback from that
point.
H INT
The numeric indication for measure/beat
display depends on the time signature and
tempo of the pattern/song selected in RHYTHM
mode. (For details, see page 59.)
TR
TR
ACK2
ACK2
EQ
EQ
HI
HI
0FF
Track number V-take numbe
r
Currently selected track
TR
TR
2-
2-
1
TR
TR
2-
2-
2E
OOOOOO
OOOOOO
000
Time display
Measure/beat display
SecondsMinutes Milliseconds
OO1-O1
OO1-O1