Specifications

Reference [Recorder]
38 ZOOM PS-04
■ Setting a mark in a song
By setting a mark anywhere in a project, you can
easily return to that point later. Up to 100 markers
can be set per project.
1. From the AUDIO mode top screen,
move to the point where you want to
set a mark.
H INT
A mark can be set either in the playback or stop
condition.
2. Press the [MARK] key.
A mark is set at the current location, and the mark
number is shown on the display for a while.
Newly added marks are automatically numbered in
the range from 01 to 99. (The mark number 00 is
always assigned to the beginning of the project.) If
you add a new mark between two existing marks,
all subsequent marks will be renumbered, as shown
below.
■ Locating a mark
You can jump to any mark position (Locate
function).
1. Display the AUDIO mode top screen.
2. Use the cursor left/right keys to
switch the counter indication to mark
units.
At this screen, you can specify a mark to locate.
When the displayed marker number and the current
position match, the indication “MARK” is shown to
the left of the mark number.
3. Turn the dial to select the number of
the mark to which you want to move.
When you select a mark number, the recorder
immediately moves to that position.
■ Deleting a mark
You can delete marks that are no longer needed.
1. Display the AUDIO mode top screen
and switch the counter indication to
mark units.
2. Turn the dial to select the number of
the mark you want to delete.
N OTE
If the current position does not match the mark
position, the mark cannot be deleted. When the
indication “MARK” is shown to the left of the
mark number, the displayed marker number
and the current position match.
3. Press the [MARK] key.
The selected mark is deleted, and all subsequent
marks will be renumbered, as shown below.
SET
SET
01
Mark number
00
01
02
03
00
01
02
03
04
Mark
number
Song
Mark
number
Song
Add a mark
MARK
MARK
01
Mark number
Shown when current position is on the mark
MARK
MARK
03
MARK
MARK
D
EL