Specifications
Reference [Recorder]
40 ZOOM PS-04
7.
To stop repeat playback, press the
[
R/P] key once more.
Also after the recorder was stopped, you can play
the specified passage again for as long as the A-B
repeat function is not canceled.
8.
To cancel the A-B repeat function,
perform steps 1 and 2 once more and
set A-B repeat to OFF.
H
INT
It is also possible to combine repeat playback
with special functions such as auto punch-in/
out. For example, if you set points A and B
slightly outside the intended recording range,
the recorder will automatically return to point A
after auto punch-in/out is completed, and the
recorded content will be played, letting you
check the success of the procedure.
Re-recording only a specified
part (Punch-in/out function)
Punch-in/out is a function that lets you re-record
just a specified part of a previously recorded track.
The action of switching a currently-playing track to
record mode is called “punch-in”, and the action of
switching back from recording to playback is called
“punch-out”.
The PS-04 provides two ways to do this. You can
use the panel keys to punch-in/out manually
(“manual punch-in/out”), or you can have punch-in/
out occur automatically at previously specified
points (“auto punch-in/out”).
■
Using manual punch-in/out
This section describes how to perform manual
punch-in/out to re-record a part of a previously
recorded track, using the panel keys.
1.
From the AUDIO mode top screen,
repeatedly press the status key of the
track on which you want to perform
punch-in/out, until the “REC”
indication is visible.
If necessary, adjust the input sensitivity and
recording level for the instrument again.
2.
While playing the instrument to be
recorded, operate the fader of the
selected track to adjust the monitor
level.
3.
Move to a point several measures
before the intended punch-in point,
and press the [
R/P] key to begin
recorder playback.
4.
When you come to the punch-in
point, press the [REC] key.
The key lights up and track recording begins from
that location (punch-in).
5.
When you come to the intended
punch-out point, press the [REC] key
once more.
The [REC] key goes out, and the PS-04 switches
from recording to playback (punch-out).
6.
Press the [R/P] key to stop recorder
playback.
After recording, the indication “WAIT” is briefly
shown on the display.
H
INT
The duration of the “WAIT” interval depends on
the recording condition.
7.
To check the newly recorded
content, move to the point of step 4,
and press the [
R/P] key.
8.
If you are satisfied with the result,
press the status key for that track to
turn off the “REC” indication.
OOOO15OOOO15
120