Specifications

Checking the grade setting of a project
ZOOM PS-04 45
5. To change the volume of the
precount, use the cursor left/right
keys.
The following indication appears on the display.
6. Turn the dial to adjust the precount
volume.
The setting range is 0 – 15.
7. When the setting is complete, press
the [EXIT] key two times to return to
the AUDIO mode top screen.
When you next perform recording, the precount
will operate according to the chosen setting.
Checking the grade setting
of a project
To check the grade (sound quality) setting of the
currently active project, proceed as follows. This
procedure only allows you to check the setting, not
to change it.
1. From the AUDIO mode top screen
and with the recorder stopped, press
the [EDIT/UTILITY] key.
The AUDIO mode utility menu appears.
2. Use the cursor left/right keys to bring
up the indication “GRADE” on the
display.
3. Press the [ENTER] key.
The recording grade setting for the currently active
project is shown as follows.
• HI-FI
Recording grade set to Hi-Fi
• LONG
Recording grade set to Long
4. When the check is finished, press the
[EXIT] key two times to return to the
AUDIO mode top screen.
COUNT
VOLUME
VOLUME
10
GRADE
GRADE