Specifications

Assigning input signals to tracks
ZOOM PS-04 55
H INT
The recording level of the signal from the [LINE
IN] jack can be adjusted with fader 3 or fader 4.
(The recording level is always linked for the L
and R channel.)
6. Press the [EXIT] key to return to the
AUDIO mode or EFFECT mode top
screen.
■ Selecting the recording track(s)
Next, select the track(s) on which the input source
signal is to be recorded. Signal processing will be
different, depending on whether the input source is
mono (one signal) or stereo (2 signals), and whether
1 or 2 tracks are selected.
1. Bring up the AUDIO mode top
screen.
On the AUDIO mode top screen, you can use status
keys 1 – 4 to activate/deactivate the recording
standby condition for tracks 1 – 4.
2. To switch only one track to the
recording standby condition, press
the respective status key.
The “REC” indication appears above the level
meter for the track. This shows that the track is in
the recording standby condition.
If the currently selected input source is mono
(1 signal), this signal will be sent as is to the track.
If the source is stereo (2 signals), the signals will be
mixed and then sent to the track.
3. To switch two tracks to the recording
standby condition, hold down the
status key for one track and then
press the status key for the other
track.
Only the combination of tracks 1 and 2 or 3 and 4
can be selected. When you press the status keys 1/2
or 3/4, the “REC” indication appears above the
level meter for the respective tracks. This shows
that the tracks are in the recording standby
condition.
If the currently selected input source is mono (1
signal), the same signal will be sent to both tracks.
If the source is stereo (2 signals), the signal from
input 1 will be sent to the odd-numbered track and
the signal from input 2 to the even-numbered track.
H INT
To deactivate the recording standby condition,
press the currently selected status key once
more.
Input Track
Input 1
Input 2
Input source: mono
Recorder
Track
Recorder
Input source: stereo
Input
Input 1
Input 2
Input source: mono
Recorder
Recorder
Input source: stereo
Track 1 or 3
Track 2 or 4
Track 1 or 3
Track 2 or 4