Specifications
Reference [Mixer]
58 ZOOM PS-04
4.
Turn the dial to change the setting
value of the parameter selected in
step 3.
5.
Repeat steps 3 and 4 to make all
desired settings.
By using the cursor left/right keys or the status keys
to switch tracks, you can set the parameters for
other tracks.
6.
Press the [EXIT] key to return to the
original screen.
The top screen of AUDIO mode or RHYTHM
mode appears again.
Linking tracks (stereo link)
Two adjacent tracks can be linked so that their
parameters (except V-take switching) are controlled
together. This is referred to as “stereo link”. The
function is handy for example when recording
stereo material.
N
OTE
The stereo link function is available only for
tracks 1/2 and 3/4, not for other track
combinations.
1.
From the AUDIO mode or EFFECT
mode top screen, press the [TRACK
PARAMETER] key.
The track parameter menu for making input and
track 1 – 4 settings appears.
2.
Use the cursor left/right keys to
select one of the two tracks you want
to stereo link, and repeatedly press
the cursor [
W] key until the indication
“S-LINK” is shown on the display.
H
INT
You can also use the status keys to select the
track.
3.
Turn the dial to set the stereo link
setting to ON.
If you select track 1 or 2, tracks 1 and 2 will be
stereo linked. If you select track 3 or 4, tracks 3 and
4 will be stereo linked.
The two linked tracks will operate as follows.
• The PAN parameter functions as a
BALANCE parameter that adjusts the
volume balance between the left and right
channels. (The setting is reset to 0 for both
tracks.)
• For parameters other than PAN and
V-TAKE, the setting for the odd-numbered
track will be duplicated on the even-
numbered track.
• When you change the parameter setting for
one track, the parameter of the other track
also changes accordingly. To bring the
even-numbered V-take on the display,
press the cursor [W] key while the odd-
numbered V-take is shown.
• When you operate the fader for the odd-
numbered track, the level for both tracks
changes. (The fader for the even-numbered
track has no effect.)
4.
To cancel the stereo link function, set
the stereo link parameter to OFF.
S-LINK
S-LINK
0F
S-LINKS-LINK
0N