Specifications

Reference [Rhythm]
64 ZOOM PS-04
3. Press the [EDIT/UTILITY] key.
The pattern utility menu for making PATTERN
mode settings appears.
4. To set the time signature, use the
cursor left/right keys to bring up the
indication “TIMSIG” on the display,
and press the [ENTER] key.
The current time signature setting appears on the
display.
N OTE
When a “<>” is shown on both sides of the
setting value, the pattern has already been
recorded and the time signature has been set.
In this condition, the value cannot be changed.
5. Turn the dial to make the setting, and
then press the [EXIT] key.
The time signature can be set in the range from 1/4
to 8/4.
6. To set the number of measures, use
the cursor left/right keys to bring up
the indication “BARLEN” on the
display, and press the [ENTER] key.
The current bar length setting appears on the
display.
N OTE
When a “<>” is shown on both sides of the
setting value, the pattern has already been
recorded and the bar length has been set. In
this condition, the value cannot be changed.
7. Turn the dial to make the setting.
The bar length can be set in the range from 1 to 99.
8. Press the [EXIT] key to return to the
PATTERN mode top screen.
Drum track step input
To perform step input, the PS-04 must be in stop
mode, so that you can enter the sounds one by one
in the order that they should be played. For drum
track step input, you specify the step width (interval
between sounds) and then specify a note or rest.
When you press the [R/P] key after pressing the
status key, the playing information is entered at this
point, and the input position advances by the
number of specified steps. When you press only the
[R/P] key, no playing information is entered and
the position advances by one step. In other words, a
rest is inserted (see illustration below).
EMPTY
EMPTY
347
QUANTI
QUANTI
2E
4/4
4/4
22
Status key
[R/P] key