Specifications

SONG mode operation
ZOOM PS-04 75
interval is shorter than the pattern itself, the
song will switch to the next pattern before the
current pattern has finished playing.
8. Repeat steps 3 – 7 to enter all
required pattern information.
9. When all required pattern
information has been entered, press
the [REC] key.
The [REC] key goes out and the PS-04 returns to
the SONG mode top screen. If you press the [R/P]
key, the created song will be played.
● To overwrite pattern information
To change a pattern that has already been input,
move to the input point and press the cursor [W]
key. The name of the pattern input at this point
appears on the display. Turn the dial to select a new
pattern.
To add pattern information to a point where there
currently is none, move to the input point and press
the cursor [
W] key. The indication “←PTN”
appears on the display. Turn the dial to select a new
pattern.
● Inserting a pattern in a song
Move to the input point and perform steps 3 – 7.
The new pattern information is inserted at this
point, and subsequent patterns are shifted
backwards by the length of the inserted pattern.
● To delete pattern information
Move to the point from which you want to delete
the information, and press the cursor [W] key. In
this condition, press the [EDIT/UTILITY] key. The
current information is deleted and the previous
pattern will remain active until the next input point.
● To delete a measure
During song input ([REC] key lit), press the
[INSERT/DELETE (COPY)] key three times.
Then press the [ENTER] key. The measure is
deleted.
PATTERN A PATTERN B PATTERN C
PATTERN A PATTERN D PATTERN C
Select pattern D
PATTERN A PATTERN B PATTERN C
PATTERN A PATTERN B
PATTERN D
PATTERN D PATTERN C
Insert
PATTERN A PATTERN B PATTERN C
PATTERN A PATTERN C
Delete
PATTERN A PATTERN B PATTERN C
PATTERN A PATTERN B PATTERN D PATTERN C
Delete 1 measure