Specifications

Reference [Rhythm]
82 ZOOM PS-04
4. Turn the dial to select the copy
source end measure, and press the
[ENTER] key.
The indication “TO” appears, and you can select the
copy destination start point.
5. Turn the dial to select the copy
destination start measure.
6. To carry out the copy operation,
press the [ENTER] key.
To cancel the operation, press the [EXIT] key.
H INT
When you carry out the copy operation, the
song becomes longer by the number of copied
measures, and the EOS point is pushed back.
7. To return to the SONG mode top
screen, press the [REC] key.
The [REC] key goes out.
Transposing the entire song
You can transpose the bass track of the rhythm song
in semitone units.
1. Press the [RHYTHM] key repeatedly
to bring up the SONG mode top
screen.
2. Press the [EDIT/UTILITY] key.
The SONG mode utility menu appears.
3. Verify that the indication
“TRANSPOSE” is shown on the
display, and press the [ENTER] key.
The mode for transposing a song is enabled.
4. Turn the dial to select the transpose
setting in semitone units (-6 to 0 to
+6).
The default setting is “0” (no transposing). When
you select for example +6, the song is transposed
up by 6 semitones.
5. Press the [ENTER] key.
The indication "ENT/EXIT" appears on the display.
6. To carry out the transpose operation,
press the [ENTER] key once more.
To cancel the operation, press the [EXIT] key.
When transposing is completed, the
"TRANSPOSE" display appears again.
H INT
To return to the original condition, perform the
transpose action again.
COP
COP
008
COP
COP
002
TRANSPTRANSP
0SE
O
Transpose value