Specifications

Reference [Effects]
88 ZOOM PS-04
PRE AMP
Module
COMP
EQ
DELAY/MODULATION TOTAL
PATCH
LEVEL/ZNR
(Page 1) (Page 2) (Page 1) (Page 2)
PATCH
NAME
3. Press the [EDIT/UTILITY] key.
The name of the effect module currently selected
for that patch is shown. (For modules that comprise
several effect types, the name of the currently
selected effect type is shown.)
H INT
During effect editing, the level meters give a
rough indication of the parameter setting value.
4. Use the cursor left/right keys to
select the effect module you want to
edit.
The effect modules are switched in sequence, as
shown below.
H INT
Some effect types have a high number of effect
parameters, which are divided into 2 pages. For
some of these effect types, the indication at the
right of the display (P1/P2) shows the currently
displayed page.
5. The effect type that is used can be
changed with the cursor up/down
keys.
This is possible only for effect modules that have
several effect types. (For details, see the list in the
last section of this documentation.)
For example, when changing the effect type of the
DELAY/MODULATION module to FLANGE, the
following indication appears.
Which effect parameters can be adjusted depends
on the effect type. Switching the effect type will
also switch the effect parameter accordingly.
H INT
If you change any settings so that they are
different from the stored condition, the
indication “ED” (for “Edited”) will appear in the
top right of the display. The indication
disappears if you return the settings to the
original value.
6. Use faders 1 – 4 to adjust the effect
parameters.
During effect editing, faders 1 – 4 are assigned to
various effect parameters. When you move a fader,
the respective parameter value is shown for a few
seconds on the display. The level meters give a
rough indication of the value. For a list of
parameters in each module/effect type, see page
104.
COMP
COMP
Effect parameter setting
Effect module name (or effect type name)
FLANGE
FLANGE
Effect type name
DELAY/
MODULATION
CHORUS
Effect
module
Effect
type
Effect
parameters
DEPTH
RATE
MIX
FLANGER
DEPTH
RATE
FB
PHASER
POSITION
RATE
COLOR