Specifications

Basic steps for using the insert effect
ZOOM PS-04 89
H INT
When you press the status keys 1 – 4, the value
of the corresponding effect parameter is shown.
In this condition, the dial can be used to adjust
the displayed parameter value. For fine
adjustment of settings, this method is
convenient.
7. To switch the effect module between
on and off, call up the name of the
module (or the effect type) on the
display and press the [TUNER/
BYPASS] key.
When the effect module is off, the module name (or
effect type name) and the indication "-OFF-" are
shown alternately on the display.
H INT
The TOTAL module (ZNR/patch level) is always
on and cannot be set to off.
8. Repeat steps 4 – 7 as necessary to
edit other modules.
9. To adjust the patch level (the final
volume level of the patch), use the
cursor left/right keys to bring up the
indication “TOTAL” on the display,
and then operate fader 1.
The patch level setting range is 1 – 30.
10. To adjust the ZNR (Zoom Noise
Reduction) sensitivity, use the cursor
left/right keys to bring up the
indication “TOTAL” on the display,
and then operate fader 2.
Set this as high as possible without causing the
sound to be abruptly cut off when playing your
instrument.
11. When the settings are complete,
press the [EXIT] key.
The insert effect top screen returns. If you switch to
another patch without first saving the edited patch,
all changes will be lost. See the next section for
information on how to store a patch.
■ Storing an insert effect patch
To retain an edited patch, proceed as follows.
1. From the insert effect top screen,
press the [EDIT/UTILITY] key and
edit the patch.
2. When patch editing is complete,
press the [INSERT/DELETE (COPY)]
key.
The store target patch number and the name of the
currently selected patch are shown alternately on
the display.
3. Turn the dial to select the number in
which to store the patch.
4. To carry out the store operation,
press the [ENTER] key.
The edited patch is stored, and the insert effect top
screen returns.
DEPTH
DEPTH
4
Name of parameter being adjusted
Parameter setting value
Rough indication of parameter
setting
-OFF-
-OFF-
STORE)
STORE)
0