Owner's Manual
Table Of Contents
- Operation Manual
- Introduction
- Contents
- Names of parts
- Preparations
- Recording
- Playing recordings
- Managing files
- Using USB functions
- Battery settings
- Setting the date and time
- Setting the volume of the operation sound
- Enabling continuous playback
- Using mics that support plug-in power
- Setting the standard frame rate
- Setting the language shown
- Formatting microSD cards
- Restoring factory default settings
- Updating the firmware
- Responding to warning messages
- Troubleshooting
- Specifications
- Quick Guide
- Included Items
- Optional Accessories
- About Recommended Batteries
- About Writing Speed of the MicroSD Card
- Q2n-4K Operation Confirmed micro SDHC/SDXC Cards
- Safety and Usage Precautions
- Warranty
Inserting microSD cards
1.
Open the battery/card compartment cover.
2.
Insert the microSD card into the card slot.
microSD card
To remove a microSD card, push it further into the slot and then pull it out.
3.
Close the battery/card compartment cover.
NOTE
• Always make certain that the power is off when inserting or removing a microSD card. Inserting or
removing a card while the power is on could result in data loss.
• When inserting a microSD card, be sure to insert the correct end with the top side up as shown.
•
After purchasing a new microSD card, always format it using the
to maximize performance.
To format a microSD card, see “Formatting microSD cards” on page 53.
• Use a microSD card that is Class 10 or higher.
When recording at 4K resolution, use as microSD card that is UHS Speed Class 3 or higher.
12
Q2n-4K