Owner's Manual
Table Of Contents
- Operation Manual
- Introduction
- Contents
- Names of parts
- Preparations
- Recording
- Playing recordings
- Managing files
- Using USB functions
- Battery settings
- Setting the date and time
- Setting the volume of the operation sound
- Enabling continuous playback
- Using mics that support plug-in power
- Setting the standard frame rate
- Setting the language shown
- Formatting microSD cards
- Restoring factory default settings
- Updating the firmware
- Responding to warning messages
- Troubleshooting
- Specifications
- Quick Guide
- Included Items
- Optional Accessories
- About Recommended Batteries
- About Writing Speed of the MicroSD Card
- Q2n-4K Operation Confirmed micro SDHC/SDXC Cards
- Safety and Usage Precautions
- Warranty
Adjusting recording levels
Adjusting levels manually
1.
Turn to adjust the recording level.
HighLow
Adjust so that the level meters are around −12 dB with the loudest sounds.
Peak indicatorsLevel meters
NOTE
• The peak indicators light and the REC LED on the front blinks when loud sounds are input.
• Recording when the indicators are lit could cause the sound to become distorted. Lower the input vol-
ume to avoid this.
• If the sound distorts even when you lower the input volume, try changing mic positions and adjusting
the output levels of connected devices.
HINT
To clear the peak indicators, press
to open the Setting Screen once.
21