Owner's Manual

■
Battery handling (for products that use batteries)
Install batteries with the correct +/− orientations.
Use the specified batteries.
Do not use new and old batteries together. Do not use batteries of different brands or types together.
Remove the batteries when the unit will not be used for a long time.
Always turn the power OFF for all equipment before connecting any cables.
NOTE: Contact our company service department if a leak should occur.
■
Connecting cables and devices
Always turn the power OFF for all equipment before connecting any cables or devices.
Always disconnect all connected cables and places before moving the unit.
■
Microphones (for products that use microphones)
Always turn the power OFF for all equipment before connecting any microphones.
Do not apply excessive force to microphone plugs when microphones are connected.
Attach the protective cap (if one is included with the product) when no mic is connected for a long time.
■
Volume
Do not use at a loud volume for a long time.
Usage Precautions
■
Interference with other electronic equipment
In consideration of safety, this product has been designed to minimize its emission of electromagnetic waves and to
suppress interference from external electromagnetic waves. However, nearby placement of equipment that is very
susceptible to interference or that emits powerful electromagnetic waves could result in interference. If this occurs,
place this product and the other device farther apart.
With any type of electronic device, including this product, electromagnetic interference could cause malfunction, cor-
rupt or destroy data and result in other unexpected trouble. Always use caution.
■
Cleaning
Use a soft cloth to clean the exterior of the unit if it becomes dirty. If necessary, use a damp cloth that has been wrung
out well to wipe it.
If a part made of rubber, including silicon, becomes dirty, wipe it with a soft damp cloth that does not shed fibers.
Never use abrasive cleansers, wax or solvents such as alcohol, benzene or paint thinner.
■
Temperature considerations
Continuous use for long periods of time, for example, might cause the unit to become warm. This is normal as long as
it does not become too hot to touch.
■
Breakdown and malfunction
If the unit becomes broken or malfunctions, immediately turn the power off, disconnect the AC adapter or external
power supply, remove the batteries and disconnect all other cables and devices.
Contact the store where you bought the unit or our service department with the following information: product model,
serial number and specific symptoms of breakdown or malfunction, along with your name and telephone number.
FCC regulation warning (for U.S.A.)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be deter- mined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
For EU Countries
Declaration of Conformity
Z2I-3311-02
0
0
0
0
0
0
0
0
0
0
(S)