Operation Manual

ManualsBrandsZoom ManualsAudioRFX2000

Thank you for selecting the ZOOM RFX-2000 (hereafter simply called the "RFX-2000"). The

RFX-2000 is a sophisticated digital reverb and multi-effect processor with the following features

and functions.

Please take the time to read this manual carefully so as to get the most out of your RFX-2000 and to

ensure optimum performance and reliability. Retain this manual, the warranty card and all other

documentation for future reference.

* Windows 95 and Windows 98 are registered trademarks of Microsoft Corporation.

* Macintosh is a registered trademark of Apple Computer Inc.

• Versatile effects and high-quality reverb

The RFX-2000 comes with a full complement of 48 preset effects (8 effects x 6 banks). The

reverb effects alone allow 121 different settings. The convincing sound stage created by the

RFX-2000 far surpasses anything else available in this class.

• 100 patch memory for immediate use

Up to 100 patches (effect settings) can be stored in the internal memory. Calling up any patch is

quick and easy.

• Supplied editing software

The RFX-2000 is supplied with nifty software that lets you manage and edit patches on a

computer. (Versions for Windows 95/98 and Macintosh are included.) Besides patch editing and

management, the software also provides access to eight additional effects including a 31-band

graphic equalizer and a 20-tap delay effect.

• Digital output

The S/PDIF output (with optical and coaxial connectors) allows connection to consumer

equipment with digital input (digital multitrack recorder, MD recorder, DAT recorder or

similar), keeping the signal in the digital domain.

• MIC IN jack

The dedicated microphone jack on the front panel comes in handy for creating vocal effects

without having to make cumbersome connections in the rear. Controlling the VOCODER effect

is a snap thanks to this feature.

• Built-in tap input

Time-based parameters such as delay time can be entered directly, using the tap input feature.

This makes it easy for example to match the delay time to the tempo of a song.

• MIDI based control

Functions such as patch switching, real-time parameter control, and storing of patch data on

external equipment can be performed via a MIDI link.

OPERATION MANUAL

Controls and Functions ••••••••••••••••• 2

Front Panel ••••••••••••••••••••••••••• 2

Rear Panel •••••••••••••••••••••••••••• 2

Rack Mounting •••••••••••••••••••••••••• 4

Getting Connected •••••••••••••••••••••• 4

Trying Out the Effects ••••••••••••••••••• 6

Editing a Patch •••••••••••••••••••••••••• 7

Useful Functions ••••••••••••••••••••••••• 8

Using the MIDI Control Function ••••• 10

Returning the RFX-2000

to the Factory Default Settings ••••••••• 13

RFX-2000 Effects •••••••••••••••••••••• 14

Supplied Software •••••••••••••••••••••• 24

Troubleshooting •••••••••••••••••••••••• 24

Specifications •••••••••••••••••••••••••• 25

MIDI Implimentation Chart ••••••••••••• 26

Safety Precautions/Usage Precautions

••••• 27

Introduction

Contents

Summary of content (28 pages)

PAGE 1
OPERATION MANUAL Introduction Thank you for selecting the ZOOM RFX-2000 (hereafter simply called the "RFX-2000"). The RFX-2000 is a sophisticated digital reverb and multi-effect processor with the following features and functions. • Versatile effects and high-quality reverb The RFX-2000 comes with a full complement of 48 preset effects (8 effects x 6 banks). The reverb effects alone allow 121 different settings.
PAGE 2
Controls and Functions Front Panel Controls and Functions (1) POWER switch (10) STORE key (12) VALUE UP/DOWN keys (11) Level meter (13) BANK key (2) MIC IN jack (3) INPUT control (4) OUTPUT control (5) MIX control and LED (6) CANCEL key (7) COMPARE key (8) MIDI key (9) PARM CHECK key (1) POWER switch Serves to turn the unit on and off. (2) MIC IN jack A dynamic microphone with an output impedance of about 600 ohms can be connected here.
PAGE 3
Controls and Functions Front Panel Controls and Functions (17) BANK LEDs (19) REV CHARACTER (EDIT 1) control and LED (20) REV TIME (EDIT 2) control and LED (22) REV EQ HIGH (EDIT 4) control and LED (18) EFFECT TYPE selector and LED (21) REV EQ LOW (EDIT 3) control and LED (12) VALUE UP/DOWN keys Serve for switching patches and changing parameter values. Holding down one key while pressing the other results in a fast change. (17) BANK LEDs These indicators show which bank is currently selected.
PAGE 4
Rack Mounting The RFX-2000 is compatible with international 19-inch rack standards (EIA, DIN). Because the unit has been designed for rack installation, it is preferable to operate the unit in this Rack Mounting/Getting Connected • The RFX-2000 uses a metal frame, making the unit heavier than it might seem at first Caution glance. While installing the unit in a rack, carefully support the weight of the unit until all screws are securely tightened.
PAGE 5
Rack Mounting Rack Mounting/Getting Connected * Rack mount screws are not supplied with the unit. Getting Connected Using the VOCODER Effect MD player or sampler or similar with recorded voice INPUT L/MONO Synthesizer R OUTPUT R L Microphone RFX-2000 MIC IN This is a connection example for using the VOCODER effect from the SFX bank. Connect a dynamic microphone to the front-panel MIC IN jack on the RFX-2000. Connect a synthesizer or other instrument to the rear-panel INPUT L/MONO jack.
PAGE 6
Trying Out the Effects This section is intended to familiarize you with the basic operation steps of the RFX-2000. Power UP 1. INPUT control of the RFX-2000 to adjust the input level. Verify that the AC adapter, sound source, and playback system are correctly connected to the RFX-2000. The INPUT control and OUTPUT control of the RFX2000 as well as the volume control of the playback system should be set to minimum. Trying Out the Effects 2.
PAGE 7
Editing a Patch A patch called up from memory can be edited using the front-panel controls. You can for example select different effects and adjust effect intensity and other parameters. If any parameter is changed from the stored condition, the new parameter value is shown on the display for about 2 seconds, and the EDITED mark (.) at the right edge of the display Parameter changed LED lights appears. This indicates that the current patch has been edited.
PAGE 8
Changing the Value of an Effect Parameter Each effect of the RFX-2000 consists of certain effect parameters which determine the intensity and tone character of the effect. Effect parameters can be adjusted with the following edit controls. MIX control The MIX control serves to adjust the balance between original sound (DRY) and effect sound (WET). When the control is turned fully counterclockwise, only the original sound is output.
PAGE 9
With each push of the PARM CHECK key, the parameter to be checked is advanced successively. REV CHARACTER Parameter adjusted with REV CHARACTER (EDIT 1) control PARM CHECK REV TIME Parameter adjusted with REV TIME (EDIT 2) control PARM CHECK Useful Functions REV EQ LOW Parameter adjusted with REV EQ LOW (EDIT 3) control PARM CHECK Comparing the Sound Before and After Edit (Compare Function) This function allows you to compare the currently edited sound to the sound before editing. 1.
PAGE 10
Using the MIDI Control Function The RFX-2000 can accept commands via a MIDI link for patch switching, parameter control, and transfer of memory contents to an external MIDI device. This section describes the general steps for using MIDI based functions. Setting the MIDI Channel Set the MIDI channel for communication with the RFX-2000 as follows. 1. function is disabled. In play mode, press the MIDI key once.
PAGE 11
Changing Effect Parameters Via MIDI The effect parameters of the RFX-2000 can be changed using MIDI control change messages sent from an external MIDI device (MIDI keyboard or sequencer or similar). This is useful to change parameters from a separate location. 1. Connect the MIDI OUT connector of the external MIDI device to the MIDI IN connector on the RFX-2000. (For information on setting the MIDI channel, see page 10.) 2.
PAGE 12
6. Supply the MIDI clock from the external MIDI device. The delay time or rate is set according to the tempo of the supplied MIDI clock and the tap beat parameter set for the respective patch see below). 7. If desired, store the patch. The parameter changed by MIDI clock tap input will revert to the original setting when the patch is switched. If wishing to retain the change, you should therefore store the patch.
PAGE 13
sending RFX- 2000 and the indication "dr" on the display of the receiving RFX-2000. When the transfer is completed, the units automatically revert to play mode. • When "AL" was selected for sending All patch data and learn table data in the memory of the receiving RFX-2000 are overwritten. • When "current patch number" was selected for sending The currently edited patch data are overwritten. Perform store as necessary. 5.
PAGE 14
RFX-2000 Effects This section lists all the effects and parameters available in the RFX-2000. For effects from the EXTRA bank (which can be called up only from a computer), only the parameters that can be adjusted with the front-panel controls of the RFX-2000 are described. Effects suitable for a send/return connection (p. 4) are marked with this symbol. Effects for which tap input (p. 9) can be used are marked with this symbol.
PAGE 15
3. PLATE 6. PERCUSSION 1 Large Plate •••••••••• 2 Bright Plate ••••••••• 3 Dark Plate ••••••••••• 4 Clear Plate ••••••••••• 5 Short Plate •••••••••• 6 Slap Plate •••••••••••• 7 Lo-Pass Plate •••••• 8 Hi-Pass Plate ••••••• 9 Rich Plate •••••••••••• 10 Endless Plate •••••• 11 Tunnel ••••••••••••••••• Simulates the reverb produced by a large plate. Bright plate reverb suitable for percussion. Plate reverb with a feeling of depth. Transparent plate reverb suitable for vocals.
PAGE 16
DELAY bank Contains single delay effects and combined effects that allow use of delay and another effect. The combined effects marked with a "+" are made up of two effects connected in series. The combined effects marked with a "/" use two effects in parallel in the left and right channel. 1 ST DLY (STEREO DELAY) Stereo delay with a delay time of max. 1486 ms. Control knob EDIT 1 EDIT 2 Parameter High Damp Time[x 100] [TAP] Description Adjusts the amount of treble attenuation in the high range.
PAGE 17
7 DLY+REV This is an in-series combination of delay and reverb. S/R Control knob EDIT 1 EDIT 2 EDIT 3 EDIT 4 Parameter Reverb Mix Reverb Time Delay Time[x 10] Delay Feedback Adjusts the delay time in 10-ms units (75:743ms). Adjusts the amount of delay feedback. Description Adjusts the reverb mix ratio. Setting range 8 DLY/REV 1 - 11 Adjusts the reverb duration.
PAGE 18
5 TRM-PAN Effect ranging from tremolo to auto-panpot. Control knob EDIT 1 EDIT 2 EDIT 3 EDIT 4 Parameter Width Depth Rate [TAP] Clip Adjusts the autoDescription Turning the control counterclockwise gives panning depth. tremolo. Turning it clockwise gives autopanning with a wider spread. 1 - 11 Setting range 6 CHO+REV 1 - 10 Adjusts the modulation cycle. 1 - 50 Adjusts the LFO waveform clip pattern that controls the modulation.
PAGE 19
4 PIT-DLY This is an effect with a pitch shifter integrated in the feedback loop. S/R Control knob EDIT 1 EDIT 2 EDIT 3 EDIT 4 Parameter Feedback Delay TIME[x 10] Pitch Pitch Goal Description Adjusts the amount of feedback. Adjusts the delay time in 10-ms units (75:743ms). Adjusts the pitch shift value. At the maximum setting (30), the shift amount is equal to the Pitch Goal setting. 1 - 75 0 - 30 1 - 11 Setting range 5 ROTARY TAP Adjusts the pitch shift amount in semitones.
PAGE 20
RE-MIX Bank This bank contains mainly effects for processing stereo sources in various ways. Lo-Fi purposely degrades sound quality for special effect. The ISOLATOR separates the signal into three bands whose level can be adjusted separately. The bank is useful for example for 2-track mixing or DJ work. 1 Lo-Fi EFX This is a special effect that can be used to purposely degrade sound quality.
PAGE 21
MIXDOWN Bank The effects in this bank serve to tailor the overall mood of a song when performing mixdown (mixing multiple tracks onto two final stereo tracks) or mastering (fine-tuning the sound and level of a final 2-track mix). For optimum results, the effects in this bank should be used with the MIX control set to 99, so that only the effect sound (WET) is output. 1 FINAL (FINAL MASTER) This is an in-series combination of a 4-band equalizer and 3-band compressor.
PAGE 22
7 MIC SIM (MIC SIMULATOR ) Simulates the characteristics of a high-quality condenser microphone while using an economical dynamic microphone. Control knob EDIT 1 EDIT 2 EDIT 3 EDIT 4 Parameter Character Threshold EQ Low EQ High Description Selects the microphone Adjusts the limiter character and the threshold. degree of enhancement. 1 - 6: For vocals 7 - 11: For instruments (larger values result in stronger enhancement) 1 - 11 Setting range 8 CABI SIM 1 - 16 Adjusts EQ Low boost/cut.
PAGE 23
(20 TAP DELAY ) This is a 20-tap delay. S/R The parameters for "20 TAP DELAY" are the same as "10 TAP DELAY" below. (10 TAP DELAY) This is a 10-tap delay. Control knob EDIT 1 Parameter Tone Description Adjusts the tone. Setting range 1 - 11 EDIT 2 S/R EDIT 3 Feedback Time [x 100] FeedbackTime[x 1] Adjusts the feedback delay time in 100-ms units (setting range 1 1486 ms) 0 - 14 Adjusts the feedback delay time in 1-ms units. 0 - 99 EDIT 4 Feedback TAP Adjusts the feedback amount.
PAGE 24
Supplied Software The RFX-2000 comes with a CD-ROM that contains software for editing patches on a personal computer. (The disc contains versions for Windows 95/98 and Macintosh.) The software comprises the following functions. (1) Patch librarian Serves to manage patch information of the RFX-2000 on the computer. Information about all patches of the RFX2000 is sent to the computer via a MIDI link and can be stored on the hard disk as a project file.
PAGE 25
Specifications • Number of preset programs 616 (8 effects x 7 banks x 11 characters) • Digital audio Interface Coaxial output Optical output (S/PDIF) • Program memory Total 100 716 programs • Sampling frequency 44.
PAGE 26
MIDI Implimentation Chart MIDI Implimentation Chart [EFFECTOR ] Date : 20 Sep, 1999 Model RFX-2000 MIDI Implimentation Chart Version :1.00 +---------------------+--------------------+--------------------+---------------------+ | | Transmitted | Recognized | Remarks | | Function ...
PAGE 27
Safety Precautions/Usage Precautions Safety Precautions In this manual, symbols are used to highlight warnings and cautions for you to read so that accidents can be prevented. The meanings of these symbols are as follows: This symbol indicates explanations about extremely dangerous matters. If users ignore Warning this symbol and handle the device the wrong way, serious injury or death could result. Caution This symbol indicates explanations about dangerous matters.
PAGE 28
ZOOM CORPORATION NOAH Bldg.