Operation Manual

ManualsBrandsZoom ManualsAudioRFX2000

RFX-2000 Effects

ZOOM RFX-2000

(20 TAP DELAY ) This is a 20-tap delay.

(10 TAP DELAY) This is a 10-tap delay.

EDIT 1

EDIT 2 EDIT 3 EDIT 4

TAP BYPASS

Tone

Feedback Time [x 100]

FeedbackTime

[x 1]

Feedback

WET

MUTE

1 - 11 0 - 14 0 - 99 0 - 30

( MULTI EFX) This is a multi-effect which allows simultaneous use of chorus or flanger,

delay, and reverb.

EDIT 1

EDIT 2 EDIT 3 EDIT 4

TAP BYPASS

Connection Modulation Mix Delay Mix Reverb Mix

WET

MUTE

1 - 11 0 - 99 0 - 99 0 - 99

(EARLY REFLECTION) This effect creates early reflections.

EDIT 1

EDIT 2 EDIT 3 EDIT 4

TAP BYPASS

Input Attenuate EQ Mid EQ Low EQ High

WET

MUTE

1 - 11 -12 - +12 -12 - +12 -12 - +12

(CUSTOM REVERB ) This is a reverb effect that allows the user to make detailed settings at the

computer.

EDIT 1

EDIT 2 EDIT 3 EDIT 4

TAP BYPASS

High Ratio Reverb Time EQ Low EQ High

WET

MUTE

1 - 11 1 - 30 -12 - +12 -12 - +12

(CUSTOM FINAL MASTER) This is an in-series combination of a 4-band equalizer and 3-band

compressor.

EDIT 1

EDIT 2 EDIT 3 EDIT 4

TAP BYPASS

Input Attenuate Low Mix Mid Mix High Mix

DRY

THRU

1 - 11 0 - 50 0 - 50 0 - 50

Control knob

Parameter

Setting range

Description

Adjusts the feedback

delay time in 100-ms

units (setting range 1 -

1486 ms)

Adjusts the feedback

delay time in 1-ms

units.

Adjusts the feedback

amount.

Adjusts the tone.

Control knob

Parameter

Setting range

Description

Adjusts the chorus or

flanger mix ratio.

Adjusts the delay mix

ratio.

Adjusts the reverb mix

ratio.

Selects the connection

method for the three

modules. For details,

please refer to the

documentation of the

supplied software.

Control knob

Parameter

Setting range

Description

Provides midrange

compensation in 1-dB

steps.

Provides low-range

compensation in 1-dB

steps.

Provides high-range

compensation in 1-dB

steps.

Adjusts attenuation

before the signal

passes through the

equalizer.

1 (-10 dB) to 11 (0 dB)

Control knob

Parameter

Setting range

Description

Adjusts the reverb

duration.

Provides low-range

compensation in 1-dB

steps.

Provides high-range

compensation in 1-dB

steps.

Adjusts the high-range

attenuation.

Control knob

Parameter

Setting range

Description

Adjusts the low-range

level to -

∞

or -24.5 to 0

dB (in 0.5-dB steps)

50: 0 dB

Adjusts the mid-range

level to -

∞

or -24.5 to 0

dB (in 0.5-dB steps)

50: 0 dB

Adjusts the high-range

level to -

∞

or -24.5 to 0

dB (in 0.5-dB steps)

50: 0 dB

Adjusts attenuation

before the signal

passes through the

equalizer.

The parameters for "20 TAP DELAY" are the same as "10 TAP DELAY" below.

S/R