RhythmTrak OPERATION MANUAL RT-123

FUNCTION Key Settings

between open hi-hat and closed hi-hat with your foot, push the FS01 and press pad 5 (CLOSED

HAT). Then release the FS01 and press pad 7 (OPEN HAT). The sound of the first pad will be heard

as soon as the FS01 is pushed, also when the pad itself is not pressed.

■ Using the FS01 to set the tempo

Press the [FUNCTION] key followed by pad 9 (FOOT SW) and then press the [TEMPO] key. (The

indication "tAP" appears on the display.)

The FS01 will function in the same way as the [TEMPO] key. The tempo can be specified by pushing

it two times (tap tempo function).

■ Using the FS01 to control start/pause

Press the [FUNCTION] key followed by pad 9 (FOOT SW) and then press the [PLAY] key. (The

indication "Cont" appears on the display.)

The FS01 will function in the same way as the [PLAY] key. The unit switches between [Playback

start] → [Pause] → [Playback start from paused position] with every push.

■ Using the FS01 to control start/stop

Press the [FUNCTION] key followed by pad 9 (FOOT SW) and then press the [STOP/EXIT] key.

(The indication "Strt" appears on the display.)

The FS01 will function in the same way as the [STOP/EXIT] key. The unit switches between

[Playback start] → [Stop] → [Playback start] with every push.

■ Using the FS01 to control bass muting

Press the [FUNCTION] key followed by pad 9 (FOOT SW) and then press the [BASS MUTE] key.

(The indication "bMut" appears on the display.)

The FS01 will function in the same way as the [BASS MUTE] key. Pushing the switch once mutes the

bass and pushing it once more turns the bass on again.

■ Using the FS01 to mute a desired track

Press the [FUNCTION] key followed by pad 9 (FOOT SW) and then press the [-] key. (The indication

"MutE" appears on the display.)

When the FS01 is pushed, the currently selected track will be muted. To select the track, use the

[DRUM A], [DRUM B], or [BASS] key.

■ Using the FS01 to play a desired track solo

Press the [FUNCTION] key followed by pad 9 (FOOT SW) and then press the [+] key. (The

indication "SoLo" appears on the display.)

When the FS01 is pushed, all tracks except the currently selected track will be muted. To select the

track, use the [DRUM A], [DRUM B], or [BASS] key.

■ Using the FS01 to control continuous percussion sound

Press the [FUNCTION] key followed by pad 9 (FOOT SW) and then press the [REPEAT/STEP] key.

(The indication "rEP" appears on the display.)

When the FS01 is pushed in pattern mode while pressing a pad, the sound of that pad will be heard

continuously.