Operation Manual

(1) INPUT connector
Serves for connection of the sound source signal from an
instrument, mixer send, etc.
When wishing to use equipment with low output, such
as a guitar, electric bass or microphone, a preamplifier
or a mixer with an integrated preamplifier must be
connected between the equipment and the 1202.
(2) OUTPUT connector
Serves for connection to the return input of the instrument
or mixer, or to the playback system.
(3) EFFECT OFF connector
By connecting the optional foot switch FS01 to this jack,
effects can be switched on and off externally. When OFF is
selected, only the original signal is output, and the power
LED on the front panel flashes in orange.
(4) POWER (AC adapter) connector
Serves for connection of the supplied AC adapter. Be sure
to use only the supplied adapter. When the AC adapter is
plugged into an AC outlet, the 1202 will be automatically
switched on.
NOTE
ZOOM STUDIO 1202
Specification
Rear Panel
ZOOM
STUDIO
EDIT
Hall Chorus
Room Flanger
Plate Pitch
1 2
Vocal Tremolo
Ambience ZNR
Orche. Cho+Rev
Session Fla+Rev
Studio Pit+Rev
Echo Trem Echo
Delay Pit Echo
Gate Trem Rev
Solo Pit Rev
Drum Fla Rev
Percus. Cho Rev
／
／
Reverse Fla Echo
／
Power Cho Echo
／
／
／
／
PATTERNEFFECTS
BANK
B
A
16
15
14
13
12
11
10
2
3
4
5
6
4
8
1(Demo)
9
EFFECT ON OFF R
OUTPUT
LR
INPUT
L MONO
FS01
／
(7) (8) (9) (10) (11)
(3) (2) (1)
Preset Programs: 512 (16 Effects × 2 Banks; A/B × 16 Patterns)
Program Controls: 2 (EDIT 1, EDIT 2)
Effect EQ: HIGH, LOW
Level & Mix Controls: INPUT, MIX ( 100% DRY — 100% EFFECT), OUTPUT
Rear I/O: INPUTS (L/MONO, R) ; –10dBm — +4dBm / 7kΩ (MONO), 14kΩ (STEREO)
OUTPUTS (L, R) ; –10dBm — +4dBm / 330Ω or more
EFFECT OFF (with optional foot switch FS01)
A/D Conversions: 2 channels, 16 bit Linear, 44.1kHz, 64 times over sampling
D/A Conversions: 2 channels, 16 bit , 44.1kHz
Dimensions: W 482 × H 44 × D 115 mm
Weight: 1.4 kg