Operation Manual

1. Connection between instrument and playback system
This example demonstrates the use of the 1202 as an instrument effecter. For a monaural setup, use only the left (L)
connector. The MIX control should normally be set to the center position.
2. Connection in send/return loop of a mixer
This type of connection allows use of the 1202 for any instrument or sound source connected to the mixer. The MIX control
should normally be turned fully clockwise.
3. Successive use of two effect types
When a compound effect (indicated by a / in the effect name) is selected, two types of effects can be used in series, as shown
in this example. It is also possible to insert an external effecter between the first and second effect.
4. Parallel use of two effect types
When a compound effect (indicated by a / in the effect name) is selected, two types of effects can be used separately, as
shown in this example.
Setup Examples
INPUT
L/MONO
R
OUTPUT
RL
Amp Amp
1202
Preamplifier,
distortion processor, or similar
INPUT
OUTPUT
1202
RETURN 3
RLR
L/MONO
INPUT
OUTPUT
1202
RETURN 2
RLR
L/MONO
INPUT
OUTPUT
1202
RETURN 1
RLR
L/MONO
SEND 3SEND 2SEND 1
INPUT
L/MONO
R
OUTPUT
R
L
Amp
1202
Delay
Preamplifier,
distortion processor, or similar
INPUT
L/MONO
R
OUTPUT
RL
Keyboard Amp Guitar Amp
1202
Preamplifier,
distortion processor, or similar
ZOOM CORPORATION
2-10-2 Miyanishicho Fuchu-shi, Tokyo 183 Japan
Tel: [phone]. Fax: [phone].
Printed in Japan 1202-5000