Operation Manual

13
Cannot select or use the device
Confirm that the • is connected to the
computer correctly.
Quit all the software that is using the •
,
and disconnect and reconnect the Thunderbolt™
cable connected to the
.
Reinstall the driver. •
Playback sound cannot be heard or is quiet
Check the speaker connections and volume •
settings on the speakers.
Ad j ust the sp e aker v olu m e o r he a dp hon e •
volume on the
.
Conrm that the Output of the Sound pane of the •
System Preferences is set to ZOOM TAC-2.
Recorded audio is too loud, too quiet or silent
Adjust the input gain of the • .
Confirm that no connection cable is plugged •
into the INSTRUMENT input jack. If you want to
record using INPUT 1, you must disconnect any
connection cable from the INSTRUMENT input
jack.
When using a condenser mic, turn phantom •
power on.
Conrm that the Input of the Sound pane of the •
System Preferences is set to ZOOM TAC-2.
The sound of the device connected to the
input jack is distorted
Confirm that the red LEDs are not lighting •
when the LED meters are showing the input
levels. If they are lighting, lower the input
levels.
Sound skips during playback or recording
If you can adjust the audio buffer size of the •
software that you are using, increase the buffer
size.
Cannot play or record
Confirm that ZOOM TAC-2 is selected in the •
Sound pane of the System Preferences.
Confirm that •
is set for input and output in
the software that you are using.
Confirm that •
i s c o n n e c t e d t o t he
computer correctly.
Quit all the software that is using the •
,
and disconnect and reconnect the Thunderbolt™
cable connected to the
.
Troubleshooting
Troubleshooting