Operation Manual

14
Specifications
Specications
Inputs INPUT 1/2 Connector XLR/TRS combo jacks (XLR: 2 hot, TRS: TIP hot)
Input gain 0, 9–60 dB (in 3dB steps)
Input impedance 3 kΩ
Maximum input level +12 dBu (at 0 dBFS)
Phantom power +48V
INSTRUMENT
(INPUT 1)
Connector Standard phone (disables INPUT 1 when in use)
Input impedance 1 MΩ
Maximum Input level +10 dBu (at 0 dBFS)
Outputs OUTPUT
L/R
Connector Connector TRS phone (balanced)
Maximum output level +14 dBu (at 0 dBFS)
Output impedance 100 Ω
PHONES Connector Standard stereo phone jack
20 mW × 2 (into 32Ω load)
Maximum output level +8 dBu (at 0 dBFS)
Output impedance 30 Ω
Frequency characteristics At 44.1 kHz −2.0 dB: 20 Hz – 20 kHz
At 96 kHz −2.0 dB: 20 Hz – 40 kHz
At 192 kHz −2.0 dB: 20 Hz – 60 kHz
Input conversion noise Measured EIN: 125 dB (IHF-A) (with 60dB, 150Ω input)
Dynamic range AD: 118 dB typical (IHF-A)
DA: 120 dB typical (IHF-A)
Number of audio recording and
playback channels
Recording: 2 channels
Playback: 2 channels
Sampling frequencies 192 kHz, 176.4 kHz, 96 kHz, 88.2 kHz, 48 kHz, 44.1 kHz
Bit depth 24-bit
Interface Thunderbolt™
Power Source Thunderbolt™
Power consumption
10 W maximum
Dimensions 129.5 mm (D) × 120.0 mm (W) × 51.3 mm (H)
Weight (main unit only) 420 g
• 0 dBm = 0.775 Vrms