User's Manual ADSL Modem X5

Chapter 2: Advanced Setup Options 19
User Name
Supplied by your service provider.
Password
Supplied by your service provider.
Service Name
Optional; supplied by your service provider.
Disconnect Time
ADSL connection will be dropped after the
ADSL line is idle for a certain amount of time
(measured in seconds). Select
0
to ensure
that you won’t be disconnected.
MRU*
Maximum Receive Unit. Largest physical
packet size, in bytes, that a network can
accept. Any messages larger must be
fragmented. Default is 1492.
MTU*
Maximum Transmission Unit. Largest
physical packet size, in bytes, that a network
can send. Any messages larger must be
fragmented. Default is 1492.
MSS*
Maximum Segment Size. Largest data
segment, in bytes, allowed within each IP
packet. Default is 1432.
Authentication
PPP user authentication method. Default is
Auto
; you can specify CHAP or PAP only.
Automatic Reconnect
Enabled by default. Check this box if you do
not want to be reconnected automatically if
the ADSL connection is terminated
unexpectedly.
*You must enter your PPP User Name and Password before making changes to
these fields; otherwise they will not take effect.
DHCP (Dynamic Host Configuration Protocol)
DHCP
is disabled by default. Typically, you should not need to
change your DHCP setting. Do so only if your service provider
requests it.
DHCP client enable
Check this box only if instructed to by your
service provider.
Host Name
If necessary, supplied by your service
provider.