User Manual

115
Applying delay to the output
1. Press .
2. Use and to select
OUTPUT, and press
.
3. Use and to select
Line Out, and press
.
4. Use and to select
Delay, and press
.
5. Use and to adjust the
delay in frames, and press
.
HINT
This can be set from 0.0 to 10.0 frames.
NOTE
•
• Delays in milliseconds differ according to the frame rate of the selected
timecode.
•
• When Sample Rate is set to 192 kHz, Output Delay is disabled.
By delaying output, timing differences for audio input into another device can be corrected.