User Manual

120
1. Press .
2. Use and to select
OUTPUT, and press
.
3. Use and to select
Line Out, and press
.
4. Use and to select
Routing, and press
.
Clear all settings
Set to pre-fader
Set to post-fader
Off
Press to cycle
through settings
• Change tracks 1–6 to
post-fader
• Change L/R tracks to
post-fader
• Change U1–U4 tracks 1–6
to post-fader
Convert input track
stereo signals to
mid-side stereo
signals for output
Tracks routed to
left line output
Tracks routed to
right line output
Change tracks 1–6 to
pre-fader
HINT
Press to cycle through the options: prefader → postfader → off.
The type of signal sent to the line outputs can be set to either prefader or postfader for each track.
Selecting signals sent to the line outputs