User Manual

182
Updating the rmware
1. Install new batteries in the or connect the dedicated
AC adapter to the USB connector.
NOTE
Upgrading is not possible if the remaining battery power is low. In this
case, replace the batteries with new ones or use the dedicated adapter.
2. Copy the update le to the root directory on an SD card.
3. Load the SD card into the card slot, and turn the power
on while pressing
.
4. Use and to select
Update, and press
.
NOTE
Do not turn the power off or remove the SD card during the update. Doing
so could cause the
to become unstartable.
5. After the update com-
pletes, turn the power off.
The rmware can be updated to the latest versions.
The latest update le can be downloaded from the ZOOM website (www.zoom.co.jp).