User Manual

Output settings

Setting signals sent to headphones (Headphone Routing)

110

Using mono headphone output

6. Use to select

MONO Mix

and press

7. Press .

Setting signals sent to headphones (Headphone Routing) (continued)

Monitoring mid-side stereo signals

Signals from a mid-side stereo mic can be converted to an

ordinary stereo signal for monitoring.

6. Use to select

and press

7. Press .

NOTE

• This is disabled for stereo-linked tracks that have Stereo Link

Mode set to MS Stereo Link.

• This is only enabled for tracks that have a mid-side microphone

or mid-side mic capsule connected and the Side Mic Level set to

RAW.

• When mid-side stereo monitoring is enabled, the prefader tracks

will be routed automatically to the headphone channels, with the

odd-numbered to the left and the even-numbered to the right. In

this case, the routing cannot be changed manually.