User Manual

Output settings
Selecting signals sent to the main outputs (MAIN OUT Routing)
122
Selecting signals sent to the main outputs (MAIN OUT Routing)
1. Press .
2. Use to select OUTPUT ,
and press
.
3. Use to select MAIN OUT
Routing
, and press .
4. Use to select the track for MAIN OUT 1 or MAIN
OUT 2 routing and press
.
Clear all settings
Tracks routed to
MAIN OUT 1
Tracks routed to
MAIN OUT 2
Set tracks 1–8 to prefader
Switches option:
• Change tracks 1–8 to
postfader
• Change L/R tracks to
postfader
• Change U1–U4 tracks
to postfader
Converting input
track stereo signals
to mid-side stereo
signals for output
Select prefader
Select postfader
Off
HINT
Press
to cycle through the options:
Prefader → Postfader → Off.
NOTE
• When Audio Interface with Rec is set to On, USB tracks 1–4 can
be assigned.
• Tracks 1–8 can be set to Prefader or Postfader.
• The L/R tracks can only be set to Postfader.
• Tracks 1–8, L/R, and USB1–4 cannot be set at the same time.
Selecting one type will deselect the other.
• When mid-side stereo monitoring is enabled, the pre-fader tracks
will be routed automatically to the main outputs, with odd to
the left and even to the right. In this case, the routing cannot be
changed manually.
5. Press .
You can send either prefader or postfader signals for each track to the main outputs.