User Manual

Output settings
Selecting signals sent to the sub outputs (SUB OUT Routing)
123
F8n Multi Track Field Recorder
Selecting signals sent to the sub outputs (SUB OUT Routing)
1. Press .
2. Use to select OUTPUT ,
and press
.
3. Use to select SUB OUT
Routing
, and press .
4. Use to select the track for SUB OUT 1 or SUB
OUT 2 routing and press
.
Clear all settings
Tracks routed to
SUB OUT 1
Tracks routed to
SUB OUT 2
Set tracks 1–8 to prefader
Switch options:
• Change tracks 1–8 to
postfader
• Change L/R tracks to
postfader
• Change U1–U4 tracks
to postfader
Select prefader
Select postfader
Off
Converting input
track stereo signals
to mid-side stereo
signals for output
HINT
Press
to cycle through the options:
Prefader → Postfader → Off.
NOTE
• When Audio Interface with Rec is set to On, USB tracks 1–4 can
be assigned.
• Tracks 1–8 can be set to Prefader or Postfader.
• The L/R tracks can only be set to Postfader.
• Tracks 1–8, L/R, and USB1–4 cannot be set at the same time.
Selecting one type will deselect the other.
• When mid-side stereo monitoring is enabled, the pre-fader tracks
will be routed automatically to the sub outputs, with odd to the
left and even to the right. In this case, the routing cannot be
changed manually.
5. Press .
You send either prefader or postfader signals for each track to the sub outputs.