User Manual

1. Press .
2. Use to select SLATE ,
and press
.
3. Use to select Slate
Tone
, and press .
▶ Continue to one of the following procedures.
Setting the volume ............................................................P.140
Setting the frequency ........................................................P.141
Setting the routing ............................................................P.141
Recording ...........................................................................P.142
Disabling the slate tone ....................................................P.143
Setting the volume
4. Use to select Level ,
and press
.
5. Use to adjust the level,
and press
.
HINT
This can be set from -20 to 0 dBFS.
By adding a slate tone when the recording starts, aligning audio to video during editing will be easier. You can also use a slate
tone to coordinate levels with connected equipment.
Slate mic/slate tone
Recording a slate tone (Slate Tone)
140
Recording a slate tone (Slate Tone)