User Manual

Using USB functions
Exchanging data with a computer (SD Card Reader)
144
Exchanging data with a computer (SD Card Reader)
Connecting to a computer
1. Press .
2. Use to select USB ,
and press
.
3. Use to select SD Card
Reader
, and press .
4. Connect the and computer with a USB cable.
NOTE
• The following operating systems are supported:
Windows: Windows 7 or later
Mac OS: Mac OS X (10.8 or later)
• The
cannot operate on USB bus power. Use the internal bat-
teries, the dedicated AC adapter or an external DC power supply
to power it.
HINT
When the
is connected to a computer, the SD cards loaded in
slots 1 and 2 are recognized as separate SD cards.
Disconnecting
1. Disconnect on the computer.
Windows: Select from the “Safely Remove Hardware
and Eject Media” icon on the bottom of the computer screen.
Mac OS: Drag and drop the icon to the Trash.
NOTE
Always follow correct computer disconnection procedures
before removing the USB cable.
2. Disconnect the cable from the computer and the ,
and press
.
By connecting the
to a computer, you can check and copy data on SD cards.