User Manual

Using an
156
Setting the power supply used by the (Power Source)
Set the DC power supply shutdown voltage, nominal voltage and type of batteries so that the remaining power supply charge
can be shown accurately. On this menu page, you can check the voltage of each power supply and the remaining battery capacity.
4. Use to select Power
Source
, and press .
Power settings for the are the same as for the .
See "Setting the power supply used" (→ P.22).
NOTE
When multiple power supplies are connected, they will be used in
the following order of priority.
1. DC power supply (Ext DC)
2. USB bus power (supplied by
)
3. AA batteries (Int AA)
The voltages of each power supply are shown on the display.
Setting the power supply used by the (Power Source)
1. Press .
2. Use to select USB ,
and press
.
3. Use to select FRC-8 ,
and press
.
Using an