User Manual

Recording

F8n Multi Track Field Recorder

Recording

1. Press .

This starts recording.

HINT

If the timecode function is enabled, recording will start from frame

00 (00 or 02 when using drop frame) and ﬁles will always end

exactly on a second. This makes synchronization easy when editing

later.

2. Press to start a new take when recording.

This will end the current take and start a new take while

continuing to record without interruption.

NOTE

Pressing

during recording is only possible after recording for

at least a second.

3. Press to pause.

NOTE

• When pausing, pausing will occur at a whole second increment.

• When recording is paused, a mark is added at that point.

Press

to resume recording.

• A maximum of 99 marks can be added to a take.

HINT

• During playback, you can press

and to jump to points

where marks have been added.

• You can also add marks without pausing. (→ P. 170)

4. Press to stop.

NOTE

• If the maximum ﬁle size is exceeded during recording (→ P.36),

recording will continue in a new take with a number that is one

higher. No gap in sound will occur between the two takes when

this happens.

• When recording on 2 SD cards simultaneously, if recording

should stop on one because it runs out of space, recording will

continue on the other SD card without interruption.

HINT

• Files are automatically saved at regular intervals during record-

ing. Even if the power is interrupted or another unexpected prob-

lem occurs during recording, an affected ﬁle can be restored to

normal by playing it with the

• Press and hold when the HOME screen is open to check the

name that will be given to the next take recorded.