User Manual

Recording

Setting the sampling rate (Sample Rate)

1. Press .

2. Use to select

REC

and press

3. Use to select

Sample

Rate

, and press .

4. Use to select the

sampling rate, and

press

Setting value Explanation

44.1kHz, 48kHz,

88.2kHz, 96kHz, 192kHz

These are standard sampling rates.

47.952kHz

Select this when recording video at 23.976 frames

per second if you want to edit at 24 frames per

second later.

48.048kHz

Select this when recording video at 24 frames per

second if you want to edit at NTSC 29.97 or 23.98

HD later.

47.952kHz (F),

48.048kHz (F)

These function the same as the two above, but the

<FILE_SAMPLE_RATE> sampling rate metadata

will be recorded as 48kHz.

This enables playback and editing with devices

and software that do not support 47.952kHz and

48.048kHz WAV ﬁles. Playback, however, will occur

at the ±0.1% speed at which the ﬁle was recorded.

NOTE

• When the recording ﬁle format is MP3, only 44.1kHz and 48kHz

can be selected.

• When 192 kHz is selected, L/R tracks will not be recorded. The

Input Delay and Output Delay are also disabled. Moreover,

Auto Mix, Ambisonic Mode, and Input Limiter > On/Off > On

(Advanced) cannot be set.

• Audio Interface with Rec cannot be used when values other than

44.1 kHz or 48 kHz are selected.

You can set the sampling rate used to record ﬁles.