User Manual

Input settings
Monitoring the input signals of specific tracks (PFL/SOLO)
79
F8n Multi Track Field Recorder
Monitoring the input signals of specific tracks (PFL/SOLO)
1. Press on the tracks that you want to monitor.
The selected track keys will light orange, and the PFL screen
will open.
"PFL" or "SOLO" appears at the top of the display, and you
will be able to monitor the input signal with headphones.
PFL mode
Track name
Level meter
(prefader input
signal level)
Parameter names
Parameter Explanation
Input Source This sets the input source.
Input Level This sets the input level.
Phantom This sets phantom power.
HPF This sets the high pass filter.
Input Limiter This sets the limiter.
Fader This sets the fader level.
Pan This sets the panning.
Parameter Explanation
Phase Invert This sets the phase.
Side Mic Level This sets the side mic level of a mid-side mic capsule.
Input Delay This sets the input delay.
Plugin Power This sets the plugin power.
Stereo Link This sets the stereo link.
Stereo Link Mode This sets the stereo link mode.
PFL Mode This sets the monitoring volume on the PFL screen.
NOTE
This does not change the signals output from MAIN OUT and SUB
OUT.
HINT
Use
to select parameters and change setting values.
2. Press or for the monitored tracks.
Open the Home Screen.
You can monitor the input signals of specified tracks. Even tracks that have not been set to record can be input to the PFL screen
and their input sounds monitored. This is convenient when using tracks as return inputs. You can also make various settings for
these tracks.