User Manual

Connecting mics/other devices to Inputs 1–8

Connecting mics

Connect dynamic and condenser mics with XLR plugs to

Inputs 1–8.

Phantom power (+24V/+48V) can be supplied to condenser

mics. (→ P.90)

Dynamic mic

(XLR cable)

Condenser mic

(XLR cable)

NOTE

When disconnecting a mic, gently pull on the XLR plug while simul-

taneously pushing the connector lock release button.

Connecting line level equipment

Connect the TRS plugs of keyboards and mixers directly to

Inputs 1–8.

Direct input of passive guitars and basses is not supported.

Connect these instruments through a mixer or effects device.

(TRS cable)

Keyboard

(TRS cable)

Mixer

The can record a total of 10 tracks simultaneously: 8 individual tracks with signals coming from Inputs 1–8 and a stereo mix

of these inputs on left and right tracks.

You can connect mics and the outputs of line-level devices such as keyboards, mixers, or instruments with active electronics

to Inputs 1–8 and record them to tracks 1–8. Alternatively, Inputs 1 and 2 can instead receive input from a ZOOM mic capsule

connected to the

MIC IN connector.

Connecting mics/other devices to Inputs 1–8