User Manual

Setting the attack time

This sets the amount of time until limiting starts after the

input signal exceeds the threshold.

5. Use to select

Attack

Time

, and press .

6. Use to adjust the time,

and press

HINT

This can be set from 1 to 4 ms.

NOTE

This setting can be made when On/Off is set to On (Normal).

Setting the threshold

This sets the level at which the limiter begins operating.

5. Use to select

Threshold

and press

6. Use to adjust the

setting, and press

HINT

This can be set from −16 to −2 dBFS.

NOTE

This setting can be made when On/Off is set to On (Normal).

Input settings

Input limiter

Input limiter (continued)