Owner's Manual
Table Of Contents
- Operation Manual
- Table of Contents
- Features
- Parts & Controls
- Getting Started
- Recording Flow
- Easy Recording Guide (Stereo Mode)
- Parts and Controls
- Battery / Power Setting
- Power / Hold Switch
- Recording and Transport Buttons
- Track 1-4 Buttons
- Input, Mic, 1 and 2 Buttons
- Record Level and Volume Buttons
- Dial and Menu Buttons
- Loading an SD Card
- Setting Date and Time
- Connecting External Devices
- Built-In Microphones
- External Mic with Power Plug
- Input 1 / 2 Connections and Phantom Power
- Using a USB Audio Interface
- Using as a USB Card Reader
- Built-In Speaker
- Mode Overview
- Switching and Confirming Modes
- Mode Details
- Mode Screens
- Optional Remote Control
- Operations
- Reference
- Main Specifications by Mode
- Settings Available in each Mode
- MTR Mode Effect Types and Parameters
- H4n Pro Patch List
- Specs
- Troubleshooting
- Index
- Supplied Accessories
- Cubase LE Startup Guide
- Warranty
:;,9,6:;(405(46+,
*/46+,
4;946+,
021
)\[[VUVWLYH[PVUZ<ZPUN057<;40*HUKI\[[VUZ
<ZPUN057<;40*HUKI\[[VUZ
;OLZLI\[[VUZOH]LKPɈLYLU[M\UJ[PVUZKLWLUKPUNVU[OL]HYPV\ZTVKLZ
>OH[PZJSPWWPUN&
If the input level reaches the maximum that the H4n Pro can record (0 dB), the recorded
sound could be distorted. The recording level should be adjusted.
:LSLJ[057<;40*VYHUK[OLJVYYLZWVUKPUNI\[[VUSPNO[Z
If you select INPUT 1 or 2, buttons will light after the selection. (Once lit, the buttons do not respond.)
Any other input source settings, such as REC LEVEL, will be made for the lit source.
Note: If the selected input clips, its button will blink.
<ZLHSSPUW\[ZV\YJLZ40*HUKHSSSPNO[
When you switch to 4CH, the H4n Pro will receive two stereo inputs: one from MIC and one from 1 and
2 together. When you press a lit button, the channel input level is shown and you can adjust its recording
level (REC LEVEL).
Note: When an input clips the corresponding button blinks.
:L[ 40* HUK PUKP]PK\HSS` MVY Z[LYLV HUK TVUV PUW\[ ;OL JVYYLZWVUKPUN
I\[[VUSPNO[Z
You can select INPUT MIC, 1 and 2 individually.
• When you use the built-in or an external stereo microphone, select INPUT MIC.
• For stereo input using the external input jacks, use both INPUT 1 and 2. Press either INPUT 1 or 2 button
and then press another button.
Note: If the selected input clips, its button will blink.
INPUT 1 & 2
buttons
FRONT