Owner's Manual
Table Of Contents
- Operation Manual
- Table of Contents
- Features
- Parts & Controls
- Getting Started
- Recording Flow
- Easy Recording Guide (Stereo Mode)
- Parts and Controls
- Battery / Power Setting
- Power / Hold Switch
- Recording and Transport Buttons
- Track 1-4 Buttons
- Input, Mic, 1 and 2 Buttons
- Record Level and Volume Buttons
- Dial and Menu Buttons
- Loading an SD Card
- Setting Date and Time
- Connecting External Devices
- Built-In Microphones
- External Mic with Power Plug
- Input 1 / 2 Connections and Phantom Power
- Using a USB Audio Interface
- Using as a USB Card Reader
- Built-In Speaker
- Mode Overview
- Switching and Confirming Modes
- Mode Details
- Mode Screens
- Optional Remote Control
- Operations
- Reference
- Main Specifications by Mode
- Settings Available in each Mode
- MTR Mode Effect Types and Parameters
- H4n Pro Patch List
- Specs
- Troubleshooting
- Index
- Supplied Accessories
- Cubase LE Startup Guide
- Warranty
:LSLJ[PVUVMPUW\[ZV\YJL
When you select an input the corresponding
EXWWRQ OLJKWV FRQÀUPLQJ WKH VHOHFWLRQ 7R
turn off the input, press the corresponding
button so the light turns off.
To monitor input signals, you must turn
MONITOR on.
Note: If no input is selected and no input buttons are
lit, no signal is being sent to the computer.
032
:L[\W<ZPUNHZH<:)H\KPVPU[LYMHJL
(KQ\Z[PUW\[HUKV\[W\[SL]LSZ
6WLU4,5<HUKTHRLZL[[PUNZ
;OLZLI\[[VUZHYL\ZHISL
K\YPUNZL[[PUN
)\[[VUVWLYH[PVUPU(<+060-TLU\
7YLZZ
:LSLJ[
HUKWYLZZ
(<+060-4,5<
EFFECT <ZLLɈLJ[ZVUS`R/a
TUNER Use tuner
MONITOR Enable monitoring
PHANTOM Enable phantom power
PLUG-IN Enable plug-in power
DISCONNECT End connection
• You cannot change the sampling
YH[L^OPSL [OLJVTW\[LYPKLU[PÄLZ
the H4n Pro as an audio interface.
• When connecting as an interface,
make sure the sampling rate (step
6) matches the recording software
HUKWSH`IHJRÄSL
• You cannot changed this setting
during recording and playback.
Audio interface use
• You can record and playback
signals directly to and from your
DAW software using the H4n Pro.
• In this mode, you can use the
/U7YVZI\PS[PULќLJ[ZVUPUW\[
signals if the sampling rate is set
to 44.1kHz.
• 5V ZWLJPÄJ KYP]LY PZ ULLKLK [V
use the H4n Pro as a USB audio
interface.
• When using a DAW or other soft
-
ware, refer to its manual.