User manual

Zoomax
®
Snow - User Manual Page 14 of 18
Connecting to a TV
Plug in the AV Cable that comes with your unit to the yellow
video plug on your TV.
 After you connect the cable the LCD screen will turn off
automatically and the image will appear on your TV
screen.
 To select the appropriate TV standard, press and hold
the Freeze Button for 3 seconds. Use the Zoom in and
Zoom out Buttons to choose PAL or NTSC, then press
the Mode Button to confirm your selection. If all is
correct, the image shall be shown on your TV.
 Once your selection is confirmed, it will become the
default TV standard of the unit next time you plug in the
cable. There is no need to set it again.
 After unplugging the AV Cable, the image will
automatically return to the LCD screen of the unit
without any other operations required.