User manual

Zoomax
TM
Snow User Manual
11
Turn on/off camera light
The camera light is on in default.
To turn light off, press and hold “mode” button for 5 seconds until BEEP goes
TWICE (keep holding if you just heard one beep).
To turn light on, press and hold “mode” button for 5 seconds until BEEP goes
TWICE (keep holding if you just heard one beep).
Adjust brightness
Hold button “Freeze” and “Zoom in (or Zoom out)” together to enter into
brightness adjustment. A brightness bar shows, then press “Zoom in” to
increase brightness and “Zoom out” to decrease it. Press “Mode” to confirm
the brightness and exit. Under this setting, if no operation for over 5 seconds,
it will exit automatically.
Connecting to a TV
Plug the AV cable packaged with the unit to your TV video input.
Long press mode button