User manual

Zoomax
TM
Snow User Manual
6
Charging the battery
- The battery should be charged prior to using the Snow for the first time.
- Connect the power adapter to the unit USB port, and then insert the other
end of the power adapter into power outlet. The power indicator will be red
during charging.
- When the battery is fully charged, the LED indicator will turn off.
- During operation, if the battery indicator on the screen has no bars
and flashes, the battery is low, and you need to recharge it.
-Charging the battery takes about 4 hours, and a fully charged battery will
last for approximately 3.5 hours. Please take an extra battery in case of
usage emergency if you go far away.
Install Short strap
- Insert the small loop on the end of the strap into the pin in the cord slot as
shown.
- Pull the other end of the strap through the loop and tighten as shown.