User manual

Manual adjustment

1 2

Turn the water hardness

dial to the position 1 or 2.

Electronic adjustment

1. Press the on/off button to activate the appliance.

2. Make sure that the appliance is in setting mode, re-

fer to ‘Setting and starting a programme’.

3. Press and hold the programme button until the indi-

cator

starts to flash and the indicator

comes on.

Wait until the indicator

goes off and the

end indicator starts to flash (the indicator

continues to flash).

5. Press the programme button.

• The end indicator flashes intermittently. The

number of flashes shows the level of the water

softener, e.g. 5 flashes + pause + 5 flashes =

level 5.

6. To adjust the level of the water softener, press the

programme button. Each time you press the pro-

gramme button you go to the next level.

7. Deactivate the appliance to confirm the setting.

Filling the salt container

Caution! Water and salt can come out from the

salt container when you fill it. Risk of corrosion.

To prevent it, after you fill the salt container, start a

programme.

1 2

Put 1 litre of water in the

salt container (only for

the first time).

Filling the rinse aid dispenser

1 2