User manual

-
max
M
A
X
1
2
3
4
+
-
3
4
To adjust the released quantity of rinse aid, turn the
selector between position 1 (lowest quantity) and po-
sition 4 (highest quantity).
Daily use
1. Open the water tap.
2. Press the on/off button to activate the appliance.
Make sure that the appliance is in setting mode, re-
fer to ’Setting and starting a programme’.
• If the salt indicator is on, fill the salt container.
• If the rinse aid indicator is on, fill the rinse aid
dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the type of
load and the degree of soil.
Using the detergent
1
2
3
4
5
If the programme has a
prewash phase, put a
small quantity of deter-
gent on the inner part of
the appliance door.
Using the combi detergent tablets
When you use tablets, that contain salt and rinse aid,
do not fill the salt container and the rinse aid dispenser.
The rinse aid indicator always comes on if the rinse aid
dispenser is empty.
1. Adjust the water softener to the lowest level.
2. Set the rinse aid dispenser to the lowest position.
20