User manual Washer Dryer PKN 81430 A
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• Obey the maximum load volume of 8 kg (refer to the “Programme chart” chapter). • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • The operating water pressure (minimum and maximum) must be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa) • The ventilation openings in the base (if applicable) must not be obstructed by a carpet.
• Do not change the specification of this appliance. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. • Do not touch the glass of the door while a programme operates. The glass can be hot. • Make sure that you remove all metal objects from the laundry. • The final part of the drying cycle occurs without heat (cool down cycle) to ensure that the items will not be damaged.
Product description 1 2 6 Rating plate 7 Drain pump filter 3 8 Feet for the appliance level Rubber feet kit (4055126249) Available from your authorized dealer. The rubber feet are particularly recommended on floating, slippery and wooden floors. Mount the rubber feet to prevent vibration, noises and displacement of the appliance during operation. Read carefully the instructions supplied with the kit.
– Rinse hold position Display The display shows: A B A) The child lock symbol. The symbol comes on the display when the related function is set. B) This indicator shows: • The programme remaining time and the programme duration. • The alarm codes. If the appliance has a malfunction, the display shows the alarm codes. Refer to the chapter 'Troubleshooting'. • The delay start. • The display shows the message Err for some seconds if: – You set a function that is not applicable for the programme.
• To activate/deactivate this option press Asciugatura a Tempo and Extra Risciacquo at the same time until the indicator Extra Risciacquo comes on/goes off. Door locked indicator shows when the door can be opened: The indicator • The indicator is on: the door cannot be opened. • The indicator flashes: the door is opening in some minutes. • The indicator is off: the door can be opened. Child Lock With this option you can prevent that the children play with the control panel.
Programme Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Sintetici (Cold) 60° Main wash - Rinses - Spin Maximum spin speed at 900 rpm Max. load 4 kg Synthetic or mixed fabrics: underwear, coloured garments, non-shrink shirts, blouses. Stiro Facile 40° Main wash - Rinses - Spin Maximum spin speed at 900 rpm Max. load 1 kg Synthetic fabric items. Normal soil. It prevents the laundry creases.
Programme Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Detergent Compartment Centrifuga Drain - Long spin Maximum speed at 1400 rpm Max. load 8 kg Separate spin for hand washed garments. Also, after programmes with water left in the tub. if needed, reduce the spin speed to adapt it to the fabrics to be spun. = OFF For cancelling a running programme or to switch the machine off .
Programmes for automatic drying Level of dryness Cupboard dry For items to put away Iron dry For ironing Type of fabric Load Cotton and linen (bathrobes, bath towels, etc) up to 4 kg Synthetics and mixed fabrics (jumpers, blouses, underwear, household linen) up to 3 kg Cotton and linen (sheets, tablecloths, shirts, etc.
Consumption values Programme Energy consumption (KWh) Water consumption (litres) Cottons 60° 1.60 65 Cotton Energy Saving Programme 60° 1.05 57 Cottons 40° 0.95 65 Synthetics 40° 0.60 55 Delicates 40° 0.70 69 Wool/ Handwash 30° 0.35 58 1) Programme duration (minutes) For the duration of the programmes, please refer to the display on the control panel.
Using detergent and additives • Measure out the detergent and the fabric conditioner. • Carefully close the detergent drawer. Detergent compartment for prewash phase. Detergent compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch). Setting a programme 1. Turn the programme knob and set the programme: – The indicator of Avvio/Pausa flashes. – The display shows the programme duration. 2. If necessary, change the temperature and the spin speed or add available functions.
Open the appliance door when the programme operates: 1. Turn the programme knob to to deactivate the appliance. 2. Wait for some minutes and then open the appliance door. 3. Close the appliance door. 4. Set the programme again. At the end of the programme • The appliance stops automatically. • The acoustic signals operate. • In the display comes on. • The indicator of Avvio/Pausa goes off. • The door lock indicator goes off. 1. Turn the programme knob to . 2. Remove the laundry from the appliance.
• Press Asciugatura a tempo again and again to set the time value (see the “Programmes for timed drying” table). • Each time you press this button the time value increases by 5 minutes. The display shows the set time value: for example – . • After some seconds the display shows a new time value: . The appliance calculates also the duration of the anti-crease and the cooling phases. • Press Avvio/Pausa to start the programme. comes on.
For more information see ‘At the end of the drying programme “ of the previous chapter. Fluff in the fabrics During the washing and/or drying phase, some types of fabric, (sponge, wool, sweatshirt) could release fluff. The released fluff could stick to the fabrics during the next cycle. This inconvenient increases with technical fabrics.
Obey the instructions that you find on the packaging of the products. Care and cleaning Warning! Door seal Disconnect the appliance from the mains supply before you clean it. Regularly examine the seal and remove all objects from the inner part. External cleaning Clean the appliance only with soap and warm water. Fully dry all the surfaces. Caution! Do not use alcohol, solvents or chemical products.
1. 2. 2. 35° 45° 3. 1. Cleaning the drain pump 3. Regularly examine the drain pump and make sure that it is clean. Clean the pump if: • The appliance does not drain the water. • The drum cannot turn. • The appliance makes an unusual noise because of the blockage of the drain pump. • The display shows an alarm code because of the problem with water drain. 1. 2. 4. Warning! Disconnect the mains plug from the mains socket. Do not remove the filter while the appliance operates.
If this occurs, do steps (1) through (8) of 'To clean the drain pump'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate again the drain system: 1. Put 2 litres of water in the main wash compartment of the detergent dispenser. 2. Start the programme to drain the water. 6. 7. 1 2 8.
Problem Possible solution Make sure that the appliance door is closed. Make sure that there is not a damaged fuse in the fuse box. Make sure that the Start/Pause has been pressed. If the delay start is set, cancel the setting or wait for the end of countdown. Deactivate the Child Lock function if it is on. The appliance does not fill with water. Make sure that the water tap is open. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority.
Problem The appliance makes an unusual noise. Possible solution Make sure the levelling of the appliance is correct. Refer to 'Installation'. Make sure that the packaging and/or the transit bolts are removed. Refer to 'Installation'. Add more laundry in the drum. The load may be too small. The appliance fills with water and drain immediately. Make sure that the drain hose is in the correct position. The hose may be too low. The cycle is shorter than the time displayed.
Technical information Dimensions Width / Height / Depth Total depth Electrical connection: Voltage Overall power Fuse Frequency Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture Water supply pressure 600 / 850 / 600 mm 640 mm 220-230 V 2000 W 10 A 50 Hz IPX4 Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Cold water Water supply 1) Maximum wash load Cotton 8 kg Maximum
www.electrolux.
