User manual

3. With a socket spanner 7 remove the injectors and
replace them with the ones which are necessary for
the type of gas you use.
4. Assemble the parts, follow the same procedure
backwards.
5. Replace the rating label (it is near the gas supply
pipe) with the one for the new type of gas supply.
You can find this label in the package of the injec-
tors supplied with the appliance.
If the supply gas pressure is changeable or different
from the necessary pressure, you must fit an applicable
pressure adjuster on the gas supply pipe.
Adjustment of minimum level
To adjust the minimum level of the burners:
1. Light the burner.
2. Turn the knob on the minimum position.
3. Remove the control knob.
4. With a thin screwdriver, adjust the by-pass screw
position. If you change from natural gas 20 mbar to
liquid gas, fully tighten the adjustment screw in. If
you change from liquid gas to natural gas 20 mbar,
undo the by-pass screw approximately 1/4 of a
turn.
1
1 Minimum adjustment screw
5. Make sure the flame does not go out when you
quickly turn the knob from the maximum position to
the minimum position.
Warning! Do not set the appliance on a base
Levelling
Use small feet on the bottom of appliance to set same
level of cooker top surface with other surfaces
Electrical installation
Warning! Only a qualified and competent person
must do the electrical installation.
The manufacturer is not responsible if you do not
follow safety precautions from chapter "Safety In-
formation".
This appliance is only supplied with a main cable.
MANUFACTURER:
C.so Lino Zanussi, 26-33080 Porcia (PN), Italy.
Disposal
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailed information about recycling of this product,
please contact your local council, your household waste
disposal service or the shop where you purchased the
product.
Packaging material
The packaging material is environmentally-friend-
ly and recyclable. Plastic parts are marked with interna-
tional abbreviations such as PE, PS, etc. Dispose of the
packaging material in the containers provided for this
purpose at your local waste management facility.
Warning! Your appliance should be made
inoperable before it is disposed of, so that it does
not constitute a danger.
To do this, take the mains plug from the socket and
remove the mains cable from the appliance.
16