User manual

Make sure that the mains plug and cable is not
squashed or damaged by the back of the appliance
(if present).
Make sure that the mains plug is accessible after in-
stallation.
Do not pull the mains cable to disconnect the appli-
ance. Always pull the mains plug.
You must have correct isolation devices: line protect-
ing cut-outs, fuses (screw type fuses removed from
the holder), earth leakage trips and contactors.
Information on the voltage is on the rating plate.
Gas connection
Make sure that ventilation around the appliance is
good. A defective air supply could cause lack of oxy-
gen.
Make sure that the gas supply is correct with the gas
type on the rating plate, refer to "Product Descrip-
tion" chapter.
This appliance is not connected to a combustion
products evacuation device. It must be installed and
connected in accordance with current installation
regulations. Particular attention shall be given to the
relevant requirements regarding ventilation.
The use of a gas cooking appliance cause heat and
moisture in the room in which it is installed. Make
sure that the ventilation in kitchen is good: keep nat-
ural ventilation holes open or install a mechanical
ventilation device (mechanical extractor hood).
More ventilation (for example opening of a window or
increasing the level of mechanical ventilation where
present) is necessary when you intensive operate
the appliance for a long time .
Service
Only an authorised service engineer can repair this
appliance. Use only original spare parts. Contact an
authorized Service Centre.
Product description
General overview
10
2 3 4
6
5
7
8
9
1
1
2
3
4
1 Hob control knobs
2 Oven function control knob
3 Oven temperature control knob
4 Minute minder control knob
5 Power indicator
6 Grill
7 Oven lamp
8 Fan
9 Rating plate
10 Shelf runner
4