User manual

Removing the oven door and the glass panel
1
Open the door fully
and hold the two door
hinges.
2
Lift and turn the lev-
ers on the two hinges.
3
Close the oven door
to the first opening posi-
tion (halfway). Then pull
forward and remove it
from its seat.
1
1
4
Place the door on a
stable surface protected
by a soft cloth.
Use a screwdriver to re-
move 2 screws from bot-
tom edge of door
Important! Do not loose
the screws
3
2
2
5
Use a spatula made
of wood or plastic or
equivalent to open the in-
ner door
Hold the outer door, and
push the inner door
against the top edge of
the door
6
Lift the inner door
7
Clean inner side of
the door
Clean the glass panel
with water and soap. Dry
it carefully.
Warning! Only clean the glass panel with water
and a soap. Abrasive cleaning agents, stain
removers and sharp objects (e.g. knives or scrapers)
can cause damage to the glass.
Inserting the door and the glass panel
When the cleaning procedure is completed, insert the
oven door. To do so, do the steps in opposite way.
4
4
5
5
6
Stainless steel or aluminium appliances:
Clean the oven door with a wet sponge only. Dry
it with a soft cloth.
Do not use steel wool, acids or abrasive materials as
they can damage the oven surface. Clean the oven
control panel with the same precautions
Oven lamp
Warning! There is a danger of electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch off the
circuit breaker.
Put a cloth on the bottom of the oven for protec-
tion of the oven light and glass cover.
Replacing the oven light bulb/cleaning the glass cover
1. Turn the glass cover anti-clockwise to remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with applicable 300°C
heat-resistant oven light bulb.
4. Install the glass cover.
9