User Manual GETTING STARTED? EASY.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
• • • • • • • • • – areas for communal use in blocks of flats or in launderettes. Do not exceed the maximum load of 8 kg (refer to the "Programme chart" chapter). The operating water pressure at the water entry point from the outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar (0.8 MPa). The ventilation opening in the base must not be covered by a carpet, mat, or any floor covering.
ELECTRICAL CONNECTION USE WARNING! Risk of injury, electric shock, fire, burns or damage to the appliance. WARNING! Risk of fire and electric shock. • • • • • • • • • The appliance must be earthed. Always use a correctly installed shockproof socket. Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug and to the mains cable.
PRODUCT DESCRIPTION APPLIANCE OVERVIEW 1 2 3 4 5 6 7 1 Worktop 2 Detergent dispenser 5 Rating plate 6 Drain pump filter 3 Control panel 4 Door handle 7 Feet for levelling the appliance CHILD SAFETY DEVICE This device prevents children or pets to be closed in the drum. Turn the device clockwise, until the groove is horizontal. You cannot close the door. To close the door, turn the device anticlockwise until the groove is vertical.
CONTROL PANEL CONTROL PANEL DESCRIPTION 1 2 3 1 Programme knob 3 Spin reduction button Including: 6 7 8 9 10 (Prelavaggio) (Temperatura) 7 Extra Rinse button (Extra risciacquo) (Centrifuga) 8 Start/Pause button (Avvio/Pausa) 9 Delay Start button : The no spin indicator (Partenza posticipata) 10 Liquid Detergent button liquido) • : The Rinse Hold indicator Display 4 5 Flextime buttons 5 6 Prewash Button 2 Temperature button • 4 (Detergente (Flextime) DISPLAY A.
E. Washing phase indicators. • : the spin phase • : the rinses phase • : the washing phase When a programme is set, all the indicators of the phases related to the programme come on. When the programme starts, only the indicator of the phase in operation flashes. When a phase is complete the indicator of the phase remains on. When the programme is completed, the symbol of the last phase is on.
Programme Temperature range Maximum load Reference spin speed Programme description (Type of load and soil level) 8 kg 1200 rpm The default phase of the spin speed is related to cotton items. Set the spin speed. Make sure that it agrees with the laundry. 4 kg 800 rpm Synthetic items requiring a gentle wash. Normal and light soil.5) Quick 20 40°C - 30°C 3 kg 1200 rpm A very short cycle for cotton and synthetic items with light soil level or worn only once.
Centrifuga No Spin Rinse Hold Prelavaggio Extra risciacquo Lavaggio rapido Partenza posticipata Programme options compatibility Cotoni ■ ■ ■ ■ ■ ■ ■ Cotoni Eco ■ ■ ■ ■ ■ Sintetici ■ ■ ■ ■ ■ Delicati ■ ■ ■ ■ ■ Lana/Lavaggio a mano ■ ■ ■ Scuri ■ ■ ■ Mix 20° ■ ■ Risciacquo ■ ■ Programme ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Scarico Centrifuga Stiro Facile ■ ■ ■ ■ ■ Quick 20 ■ ■ Jeans ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 30'@30° ■ ■ CONSUMPTION VALUES Sta
Programmes Load (kg) Energy consumption (kWh) Water consumption (litre) Approximate Remaining programme duration (mi- moisture (%)1) nutes) Cottons 60°C 8 1.7 80 220 53 Cottons 40°C 8 0.8 80 210 53 Synthetics 40°C 3 0.7 60 140 35 Delicates 40°C 3 0.65 60 110 35 Wool/Handwash 30°C 2 0.2 50 80 30 2) Standard cotton programmes Standard 60°C cotton 8 1.035 48 210 53 Standard 60°C cotton 4 0.640 36 200 53 Standard 40°C cotton 4 0.
• • • FLEXTIME When you set a washing programme, the display shows the default duration. 3) ■2) ■2) Jeans ■ Stiro Facile ■ Scuri ■ Delicati ■ Sintetici 1) Cotoni Eco Indicator Cotoni Press or to decrease or increase the programme duration. The Time Manager is available only with the programmes in the table. ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■2) ■ ■ ■2) ■2) ■ ■2) ■2) 1) Shortest: to fresh the laundry. 2) Programme default duration.
BEFORE FIRST USE 1. Make sure that the electrical and water connections comply with the installation instructions. 2. Remove the polystyrene block and any material from the drum. 3. Put a small quantity of detergent in the compartment for washing phase. 4. Set and start a programme for cotton at the highest temperature without laundry. This removes all possible dirt from the drum and the tub. DAILY USE WARNING! Refer to Safety chapters. LOADING THE LAUNDRY Open the water tap.
finished. (e.g. Cotton 30° programme , maximum load capacity 8 kg , the default programme duration exceeds 2 hours, in case of actual load 2 kg, the program duration will be reduced to only 1 hour 20 min). STARTING A PROGRAMME WITHOUT THE DELAY START Measure out the fabric conditioner. Carefully close the detergent drawer. BLEACH Alternatively the softener, it is also possible to use a bleach agent in the compartment programmes for white cottons. Proceed as follows: with the . 1.
INTERRUPTING A PROGRAMME AND CHANGING THE OPTIONS You can change only some options before the programme carries them out. 3. Close the appliance door. 4. Set the programme again. 1. Press the Avvio/Pausa the running programme. The related indicator flashes. 2. Change the options. button to interrupt 3. Press the Avvio/Pausa The programme continues. button again. CANCELLING A RUNNING PROGRAMME to 1. Turn the programme knob to position cancel the programme and to deactivate the appliance. 2.
HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, coloured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash white and coloured items together. • Some coloured items can discolour with the first wash. We recommend that you wash them separately for the first times. • Button up pillowcases, close zippers, hooks and poppers. Tie up belts. • Empty the pockets and unfold the items.
Regularly examine the drum to prevent limescale and rust particles. To remove rust particles use only special products for washing machines. Do this separately from the laundry wash. Always obey the instructions that you find on the packaging of the product. MAINTENANCE WASH With the low temperature programmes it is possible that some detergent stays in the drum. Perform a maintenance wash regularly. To do this: • Remove all laundry from the drum.
Open the pump door. Place a container close to the pump to collect any spillage. Unscrew carefully the drain filter to drain out the water. When no more water comes out, remove the filter. If necessary, use plier hands carefully, do not use the jaws. 1 2 Always keep a rag nearby to dry up any water spillage. Close the pump door. CAUTION! Never remove the filter during a washing cycle, always wait until the appliance has finished the cycle, and is empty.
FROST PRECAUTIONS If the appliance is installed in an area where the temperature can be less than 0° C, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Put the two ends of the inlet hose in a container and let the water flow out of the hose. 4. Empty the drain pump. Refer to the emergency drain procedure. 5. When the drain pump is empty, install the inlet hose again.
Problem Possible solution The appliance does not fill with water and drain immediately. • Make sure that the drain hose is in the correct position. The hose may be too low. The appliance does not drain the water. • • • Make sure that the sink spigot is not clogged. Make sure that the drain hose has no kinks or bends. Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to "Care and cleaning". Make sure that the connection of the drain hose is correct.
TECHNICAL DATA Dimension Width/ Height/ Depth/ Total depth 596 mm/ 854 mm/ 607 mm/ 643 mm Electrical connection Voltage Overall power Fuse Frequency 220-230 V 1850 W 10 A 50 Hz Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture IPX4 Water supply pressure 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) Minimum Maximum Cold water Water supply 1) Maximum Load Cotton 8 kg 1) Connect the
Water consumption in litres per year, based on 220 standard washing cycles for cotton programmes at 60 °C and 40 °C at full and partial load. Actual water consumption will depend on how the appliance is used.
148207721-C-292018
