User manual Washing Machine PWS 61030 A
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 3 4 5 5 6 7 Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• Obey the maximum load volume of 6 kg (refer to the “Programme chart” chapter). • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • The operating water pressure (minimum and maximum) must be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa) • The ventilation openings in the base (if applicable) must not be obstructed by a carpet.
• Use this appliance in a household environment. • Do not change the specification of this appliance. • Obey the safety instructions on the detergent packaging. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. • Do not touch the glass of the door while a programme operates. The glass can be hot. • Make sure that you remove all metal objects from the laundry. • Do not put a container to collect possible water leakage under the appliance.
Product description 1 2 3 Control panel 4 Door handle 3 5 Internal light 6 Rating plate 7 Drain pump filter 8 Feet for the appliance level 4 5 Fixing plate kit (4055171146) Use this special accessory, when you install the appliance on a plinth. It prevents the movements of the appliance when it operates. Read carefully the instructions supplied with this accessory. You can buy it in all approved Service.
Display The display shows: A B A) The child lock symbol. The symbol comes on the display when the related function is set. B) The programme time and the alarm codes. If the appliance has a malfunction, the display shows the alarm codes. Refer to the chapter 'Troubleshooting' . The display shows the message Err for some seconds if: – You set a function that is not applicable for the programme. – You change the programme while it operates.
Permanent Extra Risciacquo With this option you can permanently have an extra rinse when you set a new programme. • To activate/deactivate this option press Prelavaggio and Extra Risciacquo at the same time until the indicator Extra Risciacquo comes on/goes off. Child Lock With this option you can prevent that the children play with the control panel. • To activate/deactivate this option, press Centrifuga and Opzioni at the same time until the indicator comes on/goes off.
Programme Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Detergent Compartment A mano (Cold) 30° Main wash - Rinses - Spin Maximum spin speed at 1000 rpm Max. load 2 kg Delicate fabrics with «hand washing» care symbol. Lana 40° Main wash - Rinses - Spin Maximum speed at 1000 rpm Max. load 2 kg For machine washable wool as well as for hand washable woollens and delicate fabrics3) .
Programme Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Detergent Compartment Ammollo 30° Prewash - Soak for about 40 minutes - Stop with water in the tub Max. load 6 kg Special programme for laundry with heavy soil. Do not use for very delicate fabrics as silk or wool. Pour the detergent for the soak into the appropriate compartment. At the end of this programme the machine stops automatically with water left in the tub.
Programme Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Detergent Compartment = OFF For cancelling a running programme or to switch the machine off . 1) Standard programmes for the Energy Label consumption values According to regulation 1061/2010, the “Cotoni ” with "ECO ” option selected and the “Cotoni ” with "ECO ” option selected are respectively the “standard 60 °C cotton programme” and the “standard 40 °C cotton programme”.
Consumption values The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient temperature. Programmes Load (Kg) Energy consumption (kWh) Water consumption (litre) Approximate programme duration (minutes) Remaining moisture (%)1) Cotoni 60 °C 6 1.00 56 146 60 Cotoni 40 °C 6 0.75 56 145 60 Sintetici 40 °C 3 0.47 45 127 37 Delicati 40 °C 3 0.65 62 100 37 Lana 30 °C 2 0.
Loading the laundry 1. 2. 3. When you press the relevant button, the indicator of the set function comes on. Open the appliance door. Put the laundry in the drum, one item at a time. Shake the items before you put them in the appliance. Make sure not to put too much laundry in the drum. Close the door. Caution! Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry.
Changing the options You can change only some options before they operate. 1. Press Avvio/Pausa. The related indicator flashes. 2. Change the options. 3. Press Avvio/Pausa again. The programme continues. Opening the door While a programme or the delay start operates, the appliance door is locked and the display shows the indica. tor Caution! If the temperature and level of the water in the drum are too high, you cannot open the door. Open the appliance door when the delay start operates: 1.
• Remove hard stains. • Wash with a special detergent heavy soil stains. • Be careful with the curtains. Remove the hooks or put the curtains in a washing bag or pillowcase. • Do not wash in the appliance : – Laundry without hems or with cuts – Underwired bras. – Use a washing bag to wash small items. • A very small load can cause balance problems with the spin phase. If this occurs, adjust manually the items in the tub and start the spin phase again.
Door seal 1. 2. Regularly examine the seal and remove all objects from the inner part. 3. Cleaning the detergent dispenser 2. 1. 35° 45° 1 2 Cleaning the drain pump 3. Regularly examine the drain pump and make sure that it is clean. 4. Clean the pump if: • The appliance does not drain the water. • The drum cannot turn. • The appliance makes an unusual noise because of the blockage of the drain pump. • The display shows an alarm code because of the problem with water drain.
1. 6. 2. 7. 1 2 3. 8. 4. 1 5. 2 Emergency drain Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (8) of 'To clean the drain pump'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate again the drain system: 1. Put 2 litres of water in the main wash compartment of the detergent dispenser. 2. Start the programme to drain the water.
4. 5. 6. Put the two ends of the inlet hose in a container and let the water flow out of the hose. Empty the drain pump. Refer to the emergency drain procedure When the drain pump is empty, install the inlet hose again. Warning! Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. Troubleshooting The start of the appliance does not occur or it stops during operation.
Problem Possible solution Set the drain programme if you set an option which ends with water in the tub. The spin phase does not operate or the washing cycle lasts longer than usually. Set the spin programme. Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to 'Care and cleaning'. Adjust manually the items in the tub and start the spin phase again. This problem may be caused by balance problems. There is water on the floor.
Technical information Dimensions Width / Height / Depth Total depth Electrical connection: Voltage Overall power Fuse Frequency Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture Water supply pressure 600 / 850 / 440 mm 490 mm 220-230 V 2000 W 10 A 50 Hz IPX4 Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Cold water Water supply 1) Maximum load Cotton Spin speed Maximu
www.electrolux.
