Instructions / Assembly

P.O. BOX 620345 • MIDDLETON, WI 53562-0345 • PHONE [phone] • FAX [phone] • www. zorou f y.c om
Select
®
S P E C I F I C A T I O N S
Zoroufy® Stair Rods slide into each
bracket approximately ½". Finials
attach to the bracket, not the rod.
FINIAL LENGTH
Pineapple 1 ³/
8
"
Round 3/4"
Urn 1 ¼"
ROD GAUGE: .031"
ROD DIAMETER: 3/8"
1.38''
.5''
1.38''
0.45''
0.45''
Finial measurements
vary by style.
Please see chart at left.
ALWAYS USE A NON-SLIP PAD AND/OR ANOTHER MEANS OF INSTALLATION. STAIR
RODS ALONE ARE NOT A FORM OF CARPET INSTALLATION.
ALL PARTS ARE LACQUER COATED TO RESIST TARNISHING. DO NOT USE BRASS
CLEANER OR OTHER ABRASIVES. TO CLEAN, SIMPLY WIPE WITH A SOFT DRY CLOTH.
PERIODICALLY CHECK AND TIGHTEN ALL SCREWS AND HARDWARE.
J u s t f o l l o w t h e s e s i m p l e s t e p s .
Finial
Rod
Installation
Screws
Finial
Screw
Bracket
1. The carpet runner must be installed using another
method of installation. Zoroufy Stair Rods are for
decorative use only.
2. Attach finials to the brackets using small screws
provided in finials.
3. Locate desired position of the brackets by inserting
the rod into the brackets and laying on the stairs.
Positioning both the left and right bracket an equal
distance from the side edges of the runner is the
most preferable position.
4. For each step, install one bracket onto stairs using
screws provided or other anchors suitable for stair
material. Drilling a pilot hole first is recommended.
Insert the rod into the installed bracket and place
remaining bracket on the other end to confirm exact
position of the bracket on the other side.
5. Install remaining bracket using the same method as
above.
INSTALLATION INSTRUCTIONS
© 20 06 ZO ROU FY
C O L L E C T I O N
Note: Zoroufy stair rods are for decorative use oNly!